0 Items

Scientific Equipment Company

Cart 0 Items

Furniture & Fume Hoods

Fume Hood DOs and DON’Ts

  • 🗸 Know all the chemicals you work with. Consult SDS if you’re unsure.
  • 🗸 Check that the hood is turned and the airflow within the required range.
  • 🗸 Use proper protective equipment
  • 🗸 Elevate large equipment, like your centrifuge, to prevent airflow blockage.
  • 🗸 Make sure sash is at the correct level
  • 🗸 Keep all materials inside sash no fewer than 6 inches away from sash
  • X Don’t use the hood for chemicals it wasn’t designed for
  • X Don’t permanently store chemicals inside the hood
  • X Don’t position fan or air conditioner that direct airflow across the hood’s face
  • X Don’t block airflow through the baffles or baffle exhaust slots.
  • X Don’t leave sash open when not in use
  • X Don’t use a fume hood with biohazardous agents.

Continue reading below. . .

Balance Enclosures

Balance Enclosures

Biosafety Cabinet Accessories

Biosafety Cabinet Accessories

Biosafety Cabinets

Biosafety Cabinets

Blowers

Blowers

Canopy Fume Hoods

Canopy Fume Hoods

Chemical Fume Hoods

Chemical Fume Hoods

Chemical Storage Cabinets

Chemical Storage Cabinets

Ductless Enclosures

Ductless Enclosures

Enclosure Accessories

Enclosure Accessories

Service Fixtures

Service Fixtures

Tables

Tables

71 results

Sort By
Show 12 | 24 | 36 | 48 Items Per Page
Compare 0 Items
Showing 1 - 12 of 71 entries
The types of lab exhaust system

Ductless enclosures use both carbon and super-efficient HEPA filters to remove different contaminants. The filters are sold separately, giving you a choice between seven different types, depending on your needs. Find out which ductless chemical enclosure is right for you.


Clean benches blow filtered air horizontally over your work area to provide an ideal ISO Class 5 condition for processes like plant tissue culture, medical device assembly, and pharmacy drug prep. All you need to know about your new clean bench is here.


Biosafety cabinets protect you, your work, and the environment from hazardous particulates that require Biosafety Level 1, 2 or 3 containment. Learn more about biosafety closures.


Balance enclosures keep you and the environment safe by containing powders and particulates during weighing procedures. Find out more on balance enclosures.


Canopy hoods vent non-toxic materials like heat and steam from larger equipment like ovens and autoclaves. Check the specs for your new canopy hood.

High-performance fume hoods from Labconco

We're proud to partner with Labconco for their top-quality fume hoods, bench blower, and all their accessories. Not only do they produce great products, but we also share a similar philosophy of offering the best value to our customers. Get your fume hood selection guide.


Here's a cool fact: the average fume hood uses as much energy as an entire American household. But Labconco's hoods have special features that allow them to operate efficiently, potentially saving between 45% and 85% of your lab's energy. More on Labconco's sustainable initiatives here.

We're here to help you make the most of your lab setup.

Whether you're looking for the most innovative and practical solutions from the best manufacturers, or trying to find the best value in your existing supplies, we've got you covered. We've got a huge selection of consumables all in one place.


Can't find what you're looking for? No problem! Just send us your requirements, and we'll whip up a quote, including shipping estimates, in a couple of hours.