Back
Category
- Anemometers & Accessories
- Aspirator Pumps
- Autoclave & Sterilizer Accessories
- Autoclave Cleaners & Deodorants
- Automatic Objective Measurement Instruments
- Balance Accessories
- Bath Accessories
- Bath Cleaning Supplies
- Bath Covers
- Bath Platforms and Clamps
- Bench Scales
- Benchtop Autoclaves
- Benchtop Centrifuges
- Blender Accessories
- Blenders
- Box Furnaces
- Calibration Weights
- Centrifuge Accessories
- Centrifuge Buckets & Adapters
- Centrifuge Rotors
- Chillers & Immersion Coolers
- Coliform & Fecal Baths
- Colorimeter Accessories
- Colorimeter Cuvettes & Cells
- Comparators-Visual Measurement Instruments
- Concentrators & Accessories
- Counting Scales
- Desiccants
- Desiccator Accessories
- Desiccator Cabinets
- Diaphragm Vacuum Pumps
- Digital Melting Point Apparatus
- Dissecting Needles and Probes
- Dissecting Scalpels & Blades
- Dissecting Scissors
- Dry Bath Incubator
- Dry Block Baths
- Dry Screw Pumps
- Evaporator Accessories
- Evaporator Flasks & Glassware
- Evaporator Traps
- Explosion Proof Refrigerators or Freezers
- Fabric Heating Mantles
- Flammable Material Refrigerators or Freezers
- Flash Point Tester Accessories
- Floor Model Autoclaves
- Flotation Baths
- Flowmeter Accessories
- Flowmeters
- Free Standing Refrigerator or Freezer
- Freeze Dryer Accessories
- Furnace Accessories
- General Purpose Hotplates
- General Purpose Incubators
- General Purpose Water Baths
- Glassware Washer Accessories
- Glassware Washer Detergents
- Glassware Washers
- Glove Box Accessories
- Gravity Convection Ovens
- Heating Mantle Supports
- Heating Mantle Temperature Controllers
- Heating Tapes
- Homogenizer Accessories
- Homogenizers
- Hotplate & Stirring Hotplate Accessories
- Immersion Circulators
- Incubator Shakers
- Incubators Accessories
- Lab Scale Rotary Evaporators
- Magnetic Stir Bar Retrievers
- Magnetic Stir Bars
- Magnetic Stirrers
- Mechanical Convection Ovens
- Melting Point Capillary Tubes
- Metal Housed Heating Mantles
- Micro, Semi-Micro & Analytical Balances
- Microcentrifuges
- Microscope Accessories
- Microscope Slide Boxes & Cabinets
- Moisture Balances
- Muffle Furnaces
- Non-Vacuum Desiccators
- Orbital Shakers
- Overhead Stirrer Bearings
- Overhead Stirrer Propellers and Blades & Couplings
- Overhead Stirrer Shafts and Assemblies
- Overhead Stirrers
- Oxidation Stability Testing Apparatus
- Paddle Stirrers
- Penetrometer Accessories
- Penetrometers
- Peristaltic Pumps
- Portable Balances
- Reciprocal Shakers
- Refrigerated BOD Incubators
- Refrigerated/Heating Circulating Baths
- Rotary Vane Vacuum Pumps
- Rotators & Rocker Accessories
- Rotators & Rockers
- Shaker Accessories
- Sieve Shakers
- Spectrophotometer Cells & Cuvettes
- Sterilization Trays or Dishes
- Stirrer Accessories
- Stirring Hotplates
- Top Loading Balances
- Tube Furnaces
- Type I Ultrapure Water Cartridge Systems
- Undercounter Refrigerator or Freezer
- Vacuum Desiccators
- Vacuum Ovens
- Vacuum Pump Controllers & Gauges
- Vacuum Pump Tubing
- Viscosity Baths
- Viscosity Testing Apparatus
- Vortex Mixer Accessories
- Vortex Mixers
- Water Purification Replacement Cartridges
- Water Purification System Accessories
- Water Testing Instrument Reagents
- Weighing Boats, Dishes, Funnels & Papers
Manufacturer
- A&D Weighing
- Antylia Scientific
- Arrow Mixing Products
- Bel-Art Products
- Benchmark Scientific
- Boekel Industries
- BrandTech Scientific
- CHEMetrics™
- Caframo
- Cole-Parmer
- Conair™
- Coors Ceramics Company
- Corning
- Cytiva
- DWK Life Sciences (Kimble)
- DWK Life Sciences (Wheaton)
- Dynalon® Labware
- Eagle Thermoplastic
- Fawcett Company
- Glas-Col
- Globe Scientific
- HERMLE
- Heidolph® Instruments
- Humboldt Manufacturing
- KNF Neuberger
- Labconco
- Lovibond
- MilliporeSigma
- Miltex
- Ohaus®
- PolyScience
- SECO
- SP Industries
- Saint-Gobain Plastics
- Scientific Machine
- Sigma-Aldrich, Inc
- So-Low Environmental Equipment
- Starna Cells
- Sterlitech
- TIDI Products, LLC
- Thermo Fisher Scientific
- Thermo Scientific
- Tintometer® Group
- W.A. Hammond Drierite
- W.S. Tyler
- Walter Stern
Brands
- A&D Weighing
- Adventurer™
- Afon®
- Aqua-Clear™
- Arrow Mixing Products
- AtmosPure™
- B-Pure™
- Barnstead™
- Barnstead™ E-Pure™
- Bel-Art Products
- BenchMixer™
- Benchmark Scientific
- Blow-Hard® o.s. extra™
- Boekel Industries
- BrandTech Scientific
- CL/CR
- CLINIConic™
- Caframo
- Chromerge®
- Cimarec™
- Cimarec+™
- Cole-Parmer
- Compass™
- CoorsTek
- Corning
- DWK Life Sciences (Kimble)
- DWK Life Sciences (Kimble) Flow-Watchman™
- DWK Life Sciences (Kimble) Kimax®
- DWK Life Sciences (Kimble) Slow-Dry®
- DWK Life Sciences (Wheaton)
- DigiTrol II
- Drierite®
- Drierite™
- Dry-Keeper™
- Dynalon® Labware
- Eagle Thermoplastic
- Explorer Plus™
- Explorer™
- Fawcett Company
- FlaskScrubber™
- Frontier™
- Glas-Col
- Globe Scientific
- Guardian 2000
- Guardian 3000
- Guardian 5000
- Guardian 7000
- Heidolph North America
- Heidolph® Instruments
- Heratherm™
- Humboldt Manufacturing
- Infrasil®
- Kartell
- LabBest
- Labconco
- Laboport®
- Lindberg/Blue M™
- Lindberg/Blue M™ Mini-Mite™
- Liquiport®
- Lovibond
- Lovibond®
- Lovibond® CheckIt®
- Medilite™
- Miltex
- MiniTrol
- Nalgene™
- Navigator™
- OLEUM
- Odo-Clave®
- Ohaus®
- Orion™
- Orion™ AQUAfast™
- PR Series
- PharMed®
- Pioneer™
- Pocket / Handheld
- PolyScience
- PowrTrol
- PowrTwin
- Powrtrol®
- Precision™
- Pyrex®
- Pyrex® Spinbar®
- RampTrol
- Ranger™ 7000
- Ro-Tap®
- Ro-Tap® E Pure
- Rock Solid™
- Roto-Flo™
- SIMDOS®
- Scholar®
- Scienceware®
- Scientific Machine
- Scout™
- Secador™
- Shake 'N Bake™
- Sigma-Aldrich, Inc
- So-Low Environmental Equipment
- Spectrosil®
- Spinbar®
- Spinbox™
- Spinpak®
- Starna Cells
- Statnip™
- SteamScrubber™
- Sterlitech
- Supelco®
- SuperNuova™
- TIDI Products, LLC
- Techni-Dome®
- Thermo Fisher Scientific
- Thermo Scientific™
- Thermo Scientific™ Megafuge™
- Thermolyne™
- Traceable®
- Tygon S3™
- Tygon®
- Tygothane®
- VACUUBRAND®
- VARIO
- Vacu-vials®
- Valor™ 4000
- Ventgard™
- Versilon™
- Vibrasorb®
- Vikem®
- W.S. Tyler
- Walter Stern
- Waring™
- Waring™ Pro Prep®
- WaterPro™
- Whatman™
- Wilmad LabGlass
Amperage
- 1.8 A
- 2.1 A
- 2.5 A
- 7 A
- 7.5 A
- 8.7 A
- 10 A
- 11 A
- 12 A
- 15 A
- 16 A
- 16.5 A
Angle
- 0 to 90°
- 25°
- 26°
- 28°
- 30°
- 32°
- 35°
- 37°
- 38°
- 40°
- 45°
- 90°
Autoclavable
- Yes
Blade Diameter
- 25 mm
- 38 mm
- 48 mm
- 50 mm
- 65 mm
- 75 mm
- 75 mm OD
- 89 mm OD
- 100 mm
- 102 mm OD
Blade Dimension
- 0.125 x 0.75"
- 10 to 90 mm dia
- 12 x 30 mm
- 15 H x 40 mm W
- 19 x 75 mm
- 20 x 110 mm
- 21 x 130 mm
- 25 mm dia
- 26 H x 60 mm W
- 30 mm dia
- 38 mm dia
- 39 H x 100 mm W
- 40 mm dia
- 50 mm dia
- 50 x 50 mm
- 60 mm dia
- 64 mm dia
- 70 mm dia
- 78 H x 65 mm W
- 80 mm dia
- 100 mm dia
- 100 x 100 mm
- 125 x 125 mm
- 125 x 250 mm
- 152 mm dia
Bottom Size
- 33 cm
- 41 cm
- 46 cm
Bottom Standard Taper Joint
- 24/40 Inner
- 14/20 Inner
- 19/22 Inner
Calibration Type
- AutoCal - Automatic
- AutoCal™ - Automatic
- Digital External Span Calibration
- External
- External Calibration
- External, Internal AutoCal™ Automatic Calibration
- InCal - Semi Automatic
- Internal
- Internal Calibration AutoCal™ - Automatic
- Motor-driven Internal Auto Self
- Not applicable
- User Selectable External Span or Linearity Calibration/Digital with External Weight
Cap Color
- Assorted (White, Yellow, Blue, Orange, Green, Red, and Brown)
- Blue
- Brown
- Green
- Orange
- Red
- White
- Yellow
Capacity
- 0 to 300 g
- 0.035 ml
- 0.04 ml
- 0.09 cu ft
- 0.1 ml
- 0.11 ml
- 0.12 ml
- 0.20 cu ft
- 0.31 cu ft
- 0.35 ml
- 0.5 kg
- 1 L
- 1 lb
- 1 ml
- 1,200 g
- 1.1 kg
- 01.12 ml
- 1.2 L
- 1.2 to 1.5 ml
- 1.3 L
- 1.5 ml
- 1.5 to 3 ml
- 1.75 L
- 2 L
- 2 lb
- 2 ml
- 2,200 g
- 2.1 L
- 2.2 L
- 2.5 to 4.5 ml
- 2.9 ml
- 3 ml
- 3 x 25 mm/5 x 13 mm/6 x 6 mm Tubes
- 3L Flask
- 4 L
- 4 ml
- 4 x 100 ml
- 4 x 145 ml (with TX-150 rotor), 6 x 50 ml (with HIGHConic III rotor)
- 4,200 g
- 4.5 ml
- 5 L
- 5 L and 10 L
- 5 lb
- 5 ml
- 5.1 g/22 g
- 6 L
- 6 lb
- 6 x 50 ml
- 6 x 250 ml
- 6,200 g
- 7 L
- 7 ml
- 8 ml
- 8 x 1.5/2 ml
- 8,200 g
- 9.5 L
- 10 L
- 10 lb
- 10 ml
- 10 to 75 g
- 10,200 g
- 12 ml
- 12 to 37 ml
- 12 x 16 mm Tubes
- 12,200 g
- 14 L
- 15 L
- 15 lb
- 15 ml
- 16 ml
- 16.4 L
- 16.7 L
- 19.8 L
- 20 L
- 20 lb
- 20 ml
- 20 x 10 mm Tubes
- 20 x 13 mm Tubes
- 22 g
- 24 L
- 24 x 1.5 ml Tubes
- 24 x 1.5/2 ml
- 24,000 g
- 25 ml
- 28 L
- 30 g
- 30 g/60 g/150 g
- 30 lb
- 30 ml
- 35 ml
- 35,000 g
- 37 to 110 ml
- 40 ml
- 42 g/210 g
- 44 x 1.5/2 ml; 12 x 5 ml
- 45 L
- 45 ml
- 47.9 L
- 50 lb
- 50 ml
- 50 to 250 ml
- 51 g
- 51 g/220 g
- 55 ml
- 60 L
- 60 lb/30 kg/960 oz
- 60 ml
- 61 L
- 62 G
- 62 L
- 65 L
- 65 ml
- 65,000 g
- 65.1 L
- 66 L
- 70 lb
- 70 ml
- 71 g
- 75 L
- 76.3 L
- 80 ml
- 82 G
- 82 G/220 G
- 82 g
- 82 g/120 g
- 82 ml
- 85 ml
- 92 ml
- 97 L
- 99 L
- 100 L
- 100 g
- 100 lb
- 100 ml
- 101 g/250 g
- 102 g
- 104 L
- 105 L
- 120 G
- 120 g
- 120 g/220 g
- 120 ml
- 122 g
- 125 ml
- 140 ml
- 144.4 L
- 150 lb
- 150 lb/60 kg/2400 oz
- 150 ml
- 152 g
- 155.7 L
- 160 G
- 168 L
- 170 L
- 173 L
- 176 L
- 178 L
- 179 L
- 180 L
- 180 ml
- 200 g
- 200 ml
- 201 L
- 210 g
- 220 G
- 220 g
- 240 ml
- 250 G
- 250 g
- 250 ml
- 252 g
- 270 ml
- 300 g
- 300 g/600 g/1500 g
- 300 lb/150 kg/4800 oz
- 300 ml
- 310 g
- 320 G
- 320 g
- 330 ml
- 350 ml
- 381 L
- 400 L
- 400 lb/200 kg/6400 oz
- 400 ml
- 410 g
- 420 G
- 420 g
- 500 ml
- 510 L
- 520 G
- 520 g
- 552 L
- 594 L
- 600 g
- 600 ml
- 610 g
- 620 G
- 620 g
- 730 grains/2000 gal
- 750 L
- 750 ml
- 800 ml
- 820 G
- 820 g
- 875 grains
- 915 grains
- 1000 ml
- 1100 grains
- 1200 G
- 1200 g
- 1200 ml
- 1220 g
- 1250 grains
- 1500 g
- 1500 ml
- 1520 G
- 1520 g
- 1600 G
- 1650 grains
- 1680 grains
- 1760 grains
- 2000 g
- 2000 gal
- 2000 ml
- 2100 g
- 2200 G
- 2200 g
- 3000 g
- 3000 g/6000 g/12000 g
- 3000 grains
- 3000 ml
- 3100 g
- 3170 grains
- 3200 G
- 3200 g
- 3300 ml
- 4000 g
- 4000 ml
- 4100 g
- 4200 G
- 4200 g
- 5000 gal
- 5000 ml
- 5200 G
- 5200 g
- 5800 ml
- 6000 g
- 6000 ml
- 6100 g
- 6200 G
- 6200 g
- 8000 ml
- 8200 G
- 8200 g
- 10200 G
- 12000 G
- 12000 g
- 12000 ml
- 15000 g
- 22000 G
- 22000 ml
- Holds 3 Separatory Funnels
- Holds 4 Flask Clamps
- Holds 8 Flask Clamps
- Holds 9 Flask Clamps
- Holds 10 ml Flask
- Holds 12 Flask Clamps
- Holds 13 Flask Clamps
- Holds 16 Flask Clamps
- Holds 20 Flask Clamps
- Holds 25 ml Flask
- Holds 27 Flask Clamps
- Holds 50 ml Flask
- Holds 125 ml Flask
- Holds 250 ml Flask
- Holds 500 ml Flask
- Holds 1000 ml Flask
- Holds 2000 ml Flask
- Holds 2800 ml Flask
- Holds 3000 ml Flask
- Holds 4000 ml Flask
- Holds 5000 ml Flask
- Holds 6000 ml Flask
Certification
- ISO/IEC 17025 Accredited Certificate
Chamber Dimension
- 7" x 12"
- 10" x 18"
- 10.5 H x 11.5 W x 12" D
- 11" x 18"
- 14.5 x 13.9 x 20 in. (36.8 x 35.4 x 50.8 cm)
- 14.5 x 18.3 x 23.9 in. (36.8 x 46.4 x 60.8 cm)
- 15" x 19.7"
- 15" x 20"
- 16.3 x 13.9 x 20 in. (41.4 x 35.4 x 50.8 cm)
- 16.3 x 18.3 x 23.9 in. (41.4 x 46.4 x 60.8 cm)
- 20.6 x 21.4 x 52.6 in. (52.4 x 54.4 x 133.5 cm)
- 20.6 x 39.5 x 52.6 in. (52.4 x 100.4 x 133.5 cm)
- 21.4 x 18.3 x 27.9 in. (54.3 x 46.4 x 70.8 cm)
- 22.4 x 21.4 x 51.5 in. (56.9 x 54.4 x 130.7 cm)
- 22.4 x 39.5 x 51.5 in. (56.9 x 100.4 x 130.7 cm)
- 23.2 x 18.3 x 27.9 in. (58.9 x 46.4 x 70.8 cm)
Chamber Volume
- 7.5 L
- 23L
- 28 L
- 65 L
Chemical Method
- Bromothymol Blue
- DPD
- Phenol Red
- Potassium Iodide
Chemical Quantity
- 1 lb
- 5 lb
Chuck Maximum Shaft Diameter
- 10 mm
Class
- 1
Color
- Amber (50+% Visible Light Blocking)
- Assorted
- Black
- Blue
- Blue/Pink
- Clear
- Dark Gray
- Gray
- Green
- Natural
- Orange
- Pink
- Red
- Tan
- Translucent
- Transparent
- White
- White Bottom, Clear Top
- Yellow
Color Scales
- ADMI Color (American Standard Methods 2120 E), CIE L* a* b, Delta E* Color Difference, Hunter Lab, Platinum-Cobalt/Hazen/APHA Color, Spectral Data, XYZ Tristimulus, xyY Chromaticity Co-ordinates
- ASBC Color, CIE L* a* b, Delta E* Color Difference, EBC (European Brewing Convention), Series 52 (Brown) Scale, Spectral Data, XYZ Tristimulus, xyY Chromaticity Co-ordinates
- ASTM Color
- ASTM Color, CIE L* a* b, Delta E* Color Difference, Platinum-Cobalt/Hazen/APHA Color, Saybolt Color, Spectral Data, XYZ Tristimulus, xyY Chromaticity Co-ordinates
- CIE L* a* b, Delta E* Color Difference, European Pharmacopoeia (EP), Platinum-Cobalt/Hazen/APHA Color, Spectral Data, US Pharmacopoeia (UPS) Color, XYZ Tristimulus, xyY Chromaticity Co-ordinates
- CIE L* a* b, Delta E* Color Difference, FAC Color, Gardner Color, Spectral Data, XYZ Tristimulus, xyY Chromaticity Co-ordinates
- CIE L* a* b, Delta E* Color Difference, Gardner Color, Iodine Color, Platinum-Cobalt/Hazen/APHA Color, Spectral Data, XYZ Tristimulus, xyY Chromaticity Co-ordinates
- CIE L* a* b, Delta E* Color Difference, Honey Color, ICUMSA Color Index, Spectral Data, XYZ Tristimulus, xyY Chromaticity Co-ordinates
- Gardner Color
- Platinum Cobalt/Hazen/Apha Color
- Saybolt Color
Compatible With
- 2 x 3MTP, ID Swing Out Rotor
- 4 x 85 ml RB, ID, Hi, 6 x 85 ml RB, ID, 6 x 85 ml RB, ID, Hi Rotor Angle
- 4 x 100 ml, ID, Sealable Swing Out Rotor
- 4 x 250 ml, ID Swing Out Rotor
- 6 x 50 ml RB, 6 x 50 ml RB, ID, Hi, 6 x 50 ml RB/FA, ID Rotor Angle
- 6 x 50 ml RB, 6 x 50 ml RB/FA, ID, 10 x 50 ml FA, ID Rotor Angle
- 6 x 50 ml RB, ID, Hi Rotor Angle
- 6 x 250 ml FB, ID Angle Rotor
- 12 x 1.5/2 ml, ID Rotor Angle
- 12 x 15 ml RB, 6 x 50 ml RB/FA, ID, 12 x 15 ml RB/FA, ID, 30 x 15 ml RB/FA, ID, 10 x 50 ml FA, ID Rotor Angle
- 12 x 15 ml RB, 12 x 5 ml, Sealable, 6 x 50 ml RB/FA, ID, 12 x 15 ml RB/FA, ID, 30 x 15 ml RB/FA, ID, 10 x 50 ml FA, ID Rotor Angle
- 44 x 1.5/2 ml, 30 x 1.5/2 ml, Sealable, 24 x 1.5/2 ml, Sealable, 24 x 1.5/2 ml, 12 x 1.5/2 ml, ID, 24 x 1.5/2 ml, ID, 30 x 1.5/2 ml, ID, Sealable, 44 x 1.5/2 ml, ID, 24 x 1.5/2 ml, ID, Sealable Rotor Angle
- FC5306 Rotor
Condenser Type
- Coated Vertical Glassware
- Non-Coated Diagonal Glassware
- Non-Coated Vertical Glassware
Construction
- Two-piece
Control Accuracy
- ± 0.5 %
Depth
- 2.5"
- 2.625"
- 8"
- 8.6"
- 8.8"
- 13 cm Interior
- 15.2 cm Interior
- 20.9"
- 21"
- 22.8 cm Interior
- 25 cm Interior
- 36 cm Interior
Detector Type
- Blue Enhanced Photodiode
Diameter
- 0.020 ID x 0.145" OD
- 0.031 ID x 0.093" OD
- 0.03125 ID x 0.15625" OD
- 0.062 ID x 0.125" OD
- 0.062 ID x 0.187" OD
- 0.0625 ID x 0.125" OD
- 0.0625 ID x 0.1875" OD
- 0.080 ID x 0.140" OD
- 0.093 ID x 0.156" OD
- 0.093 ID x 0.218" OD
- 0.09375 ID x 0.1875" OD
- 0.09375 ID x 0.21875" OD
- 0.125 ID x 0.187" OD
- 0.125 ID x 0.1875" OD
- 0.125 ID x 0.25" OD
- 0.125 ID x 0.375" OD
- 0.156 ID x 0.218" OD
- 0.156 ID x 0.281" OD
- 0.187 ID x 0.25" OD
- 0.187 ID x 0.312" OD
- 0.187 ID x 0.375" OD
- 0.187 ID x 0.937" OD
- 0.1875 ID x 0.3125" OD
- 0.1875 ID x 0.375" OD
- 0.25 ID x 0.312" OD
- 0.25 ID x 0.375" OD
- 0.25 ID x 0.437" OD
- 0.25 ID x 0.4375" OD
- 0.25 ID x 0.5" OD
- 0.25 ID x 0.625" OD
- 0.25 to 0.75" ID
- 0.308" OD
- 0.312 ID x 0.437" OD
- 0.312 ID x 0.5" OD
- 0.312 ID x 0.562" OD
- 0.3125 ID x 0.4375" OD
- 0.3125 ID x 0.5" OD
- 0.3125 ID x 0.8125" OD
- 0.3125" OD
- 0.315" OD
- 0.37"
- 0.375 ID x 0.5" OD
- 0.375 ID x 0.562" OD
- 0.375 ID x 0.5625" OD
- 0.375 ID x 0.625" OD
- 0.387" OD
- 0.395" OD
- 0.437 ID x 0.625" OD
- 0.437 ID x 0.687" OD
- 0.4375 ID x 0.5625" OD
- 0.5 ID x 0.625" OD
- 0.5 ID x 0.687" OD
- 0.5 ID x 0.6875" OD
- 0.5 ID x 0.75" OD
- 0.562 ID x 0.75" OD
- 0.596" OD
- 0.603" OD
- 0.625 ID x 0.75" OD
- 0.625 ID x 0.812" OD
- 0.625 ID x 0.8125" OD
- 0.625 ID x 0.875" OD
- 0.736" OD
- 0.743" OD
- 0.75 ID x 0.937" OD
- 0.75 ID x 1" OD
- 0.75" Mast/Rod
- 0.8 ID x 2.4 mm OD
- 0.812 ID x 0.25" OD
- 0.812 ID x 0.312" OD
- 0.812 ID x 0.375" OD
- 0.875 ID x 1.125" OD
- 0.9375 ID x 0.4375" OD
- 0.966" OD
- 0.973" OD
- 1 ID x 1.25" OD
- 1.5 mm
- 1.5 mm OD
- 1.5"
- 1.6 ID x 3.2 mm OD
- 1.6 ID x 4.8 mm OD
- 1.62" Top
- 2 ID x 4 mm OD
- 2 mm
- 2 mm OD
- 2"
- 2.4 ID x 4.0 mm OD
- 2.5"
- 2.54" ID
- 3 ID x 5 mm OD
- 3 mm
- 3 mm OD
- 3"
- 3.2 ID x 4.8 mm OD
- 3.2 ID x 6.4 mm OD
- 3.2 mm
- 3.25"
- 3.4"
- 3.5" Top
- 4 ID x 5.6 mm OD
- 4 ID x 6 mm OD
- 4" ID
- 4.25" ID
- 4.5 mm
- 4.5" ID
- 4.7 mm
- 4.75"
- 4.8 ID x 6.4 mm OD
- 4.8 ID x 7.9 mm OD
- 4.8 ID x 9.5 mm OD
- 4.8 ID x 14.3 mm OD
- 5 ID x 8 mm OD
- 5 mm
- 5" ID
- 5.5"
- 5.5" Top
- 5.87 ID x 7.125" OD
- 6 ID x 9 mm OD
- 6 mm
- 6 mm OD
- 6"
- 6.35 mm
- 6.4 ID x 7.9 mm OD
- 6.4 ID x 9.5 mm OD
- 6.4 ID x 11.1 mm OD
- 6.4 ID x 12.7 mm OD
- 6.4 ID x 15.9 mm OD
- 6.4 mm
- 7 mm
- 8 ID x 12 mm OD
- 8 mm
- 8 mm (Bar), 20 mm (End Disk)
- 8 mm OD
- 9 mm
- 9 mm OD
- 9.5 ID x 12.7 mm OD
- 9.5 ID x 14.3 mm OD
- 9.5 ID x 15.9 mm OD
- 9.5 ID x 22.2 mm OD
- 9.5 mm
- 9.68 ID x 13" OD
- 10 ID x 11" OD
- 10 mm
- 10 mm ID
- 10 mm OD
- 11 mm
- 11 mm OD
- 11.1 ID x 14.3 mm OD
- 11.1 ID x 15.9 mm OD
- 11.1 ID x 17.5 mm OD
- 12 mm OD
- 12.7 ID x 15.9 mm OD
- 12.7 ID x 17.5 mm OD
- 12.7 ID x 19 mm OD
- 12.7 ID x 19.0 mm OD
- 12.7 ID x 20.6 mm OD
- 12.7 ID x 28.6 mm OD
- 12.7 mm
- 13 mm
- 13 mm OD
- 14.3 ID x 19 mm OD
- 14.3 ID x 20.6 mm OD
- 14.9 cm ID
- 15 mm ID
- 15.9 ID x 20.6 mm OD
- 15.9 ID x 22.2 mm OD
- 15.9 ID x 23.8 mm OD
- 15.9 ID x 34.9 mm OD
- 15.9 mm
- 16 mm
- 16 mm OD
- 17.5 ID x 22.2 mm OD
- 18 mm OD
- 19 ID x 25.4 mm OD
- 19 ID x 27 mm OD
- 19 ID x 28.6 mm OD
- 19 ID x 31.8 mm OD
- 19 ID x 38.1 mm OD
- 19 mm
- 19 mm OD
- 19.1 mm
- 19.7 cm ID
- 20 mm
- 20 mm ID
- 20 mm OD
- 21 mm
- 22.2 ID x 28.6 mm OD
- 22.2 ID x 30.2 mm OD
- 23 cm
- 24 cm ID
- 24 mm OD
- 24.6 ID x 33 cm OD
- 25 mm ID
- 25.4 ID x 31.8 mm OD
- 25.4 ID x 34.9 mm OD
- 25.4 ID x 38.1 mm OD
- 25.4 ID x 50.8 mm OD
- 27 mm
- 28 mm
- 28.6 ID x 38.1 mm OD
- 30 mm ID
- 30 mm OD
- 31.8 ID x 38.1 mm OD
- 31.8 ID x 41.3 mm OD
- 31.8 mm OD
- 38.1 ID x 47.6 mm OD
- 38.1 ID x 50.8 mm OD
- 40 mm ID
- 43 mm
- 44 mm
- 44.4 ID x 57.2 mm OD
- 50 mm ID
- 50.8 ID x 63.5 mm OD
- 51 mm
- 54 mm
- 57 mm
- 57.2 mm OD
- 60 mm ID
- 60 mm OD Body
- 62 mm
- 70 mm
- 70 mm ID
- 73 mm
- 90 mm
- 92 mm
- 95 ID x 105 mm OD
- 100 mm OD
- 103 mm
- 110 ID x 127 mm OD
- 130 mm OD Body
- 155 mm
- 181 ID x 203 mm OD
- 190 mm
- 230 mm
- 250 mm OD
Dimension
- 0.18" D
- 0.25" D
- 0.31" D
- 0.312"
- 0.312" D
- 0.375"
- 0.375" D
- 0.5" D
- 0.62" D
- 0.625" D
- 0.68" D
- 0.75" D
- 0.87" D
- 1" D
- 1.12" D
- 1.25" D
- 1.6 in x 7.9 in x 5.3 in (41 mm x 201 mm x 135 mm) (HxLxW)
- 1.6 in x 8.1 in x 5.5 in (41 mm x 205 mm x 140 mm) (HxLxW)
- 1.75" D
- 1.87"
- 2.25" x .5"dia
- 2.25" x .75"dia
- 2.5"dia
- 2.625"dia
- 2.8 in x 9.1 in x 8 in (70 mm x 230 mm x 204 mm) (HxLxW)
- 2.9 in x 9.8 in x 9.5 in (74 mm x 250 mm x 240 mm) (HxLxW)
- 3 x 3"
- 3"
- 3.125"dia
- 3.5 x 3.5 x 0.25"
- 3.625"dia
- 3.8 in x 0.87 in x 2.8 in (97 mm x 22 mm x 71 mm) (LxHxW)
- 3.93 x 3.93"
- 4 x 4"
- 4" Length
- 4" x 1"
- 4.2 in x 9.1 in x 8 in (104 mm x 230 mm x 204 mm) (HxLxW)
- 4.25"dia
- 4.6 H x 18.2 W x 13" H
- 4.75"dia
- 5.25"dia
- 5.9 x 5.9"
- 6 x 6"
- 6" Length
- 8" Length
- 9 x 2 x 1"
- 9.1 in x 2.8 in x 8 in (230 mm x 70 mm x 204 mm) (LxHxW)
- 9.8 in x 2.9 in x 9.5 in (250 mm x 74 mm x 240 mm) (LxHxW)
- 10 L x 7 W x 8.5" H
- 12 L x 7.75 W x 5.125" D
- 12 x 12"
- 12.5 in x 11.9 in x 7.9 in (317 mm x 303 mm x 201 mm) (LxHxW)
- 15" x .375" dia
- 15.4 in x 3.7 in x 9 in (391 mm x 95 mm x 229 mm) (LxHxW)
- 15.5 in x 3.8 in x 9 in (393 mm x 96 mm x 230 mm) (LxHxW)
- 15.5 in x 14.6 in x 9 in (393 mm x 370 mm x 230 mm) (LxHxW)
- 16 L x 9 W x 10.5" H
- 16.1 in x 3.8 in x 9 in (408 mm x 97 mm x 229 mm) (LxHxW)
- 16.1 in x 14.6 in x 9 in (408 mm x 372 mm x 229 mm) (LxHxW)
- 17.2 in x 4.9 in x 14.9 in (438 mm x 125 mm x 378 mm) (LxHxW)
- 18" x .375" dia
- 18" x 2.5"dia
- 18" x 4.5"dia
- 19 L x 10.25 W x 5.125" D
- 19 x 48 mm
- 19 x 60 mm
- 19 x 75 mm
- 20" x .375" dia
- 20.25 L x 15.25 W x 5" D
- 21 x 87 mm
- 23 x 109 mm
- 24 x 110 mm
- 24 x 130 mm
- 24 x 160 mm
- 24" x .375" dia
- 24" x 2.5"dia
- 24" x 4.5"dia
- 25 H x 28 W x 21" D
- 25 x 75 mm
- 28 mm
- 30" x .375" dia
- 31 x 146 mm
- 31.5 H x 23 W x 15" D
- 34"
- 35 x 175 mm
- 36" x .375"dia
- 37 H x 14 W x 12" D
- 37 x 222 mm
- 38 Top x 25 mm Bottom
- 40 x 263 mm
- 43 mm
- 54 H x 202 W x 224 mm D
- 54 x 44 x 8 mm
- 55 x 10 x 10 mm
- 57 mm
- 64 Top x 51 mm Bottom
- 70 mm
- 76 x 57 mm Overall
- 90 dia x 7 mm H
- 102 Top x 76 mm Bottom
- 103 H x 202 W x 222 mm D
- 126 mm
- 127 Top x 89 mm Bottom
- 130 x 93 x 25 mm
- 134 mm
- 172 mm
- 174 mm
- 176 mm
- 188 mm
- 191 x 121 x 25 mm
- 192 mm
- 200 mm
- 202 mm
- 210 mm
- 224 mm
- 234 mm
- 244 mm
- 254 mm
- 264 mm
- 284 mm
- 296 mm
- 300 mm
- 309 H x 209 W x 321 mm D
- 309 mm H x 209 mm W x 321 mm D
- 315 H x 198 W x 294 mm D
- 316 H x 217 W x 442 mm D
- 321 mm x 309 mm x 209 mm (LxHxW)
- 326 H x 259 W x 466 mm D
- 327 H x 249 W x 330 mm D
- 334 mm
- 338 mm
- 340 H x 354 W x 230 mm D
- 435 x 170 x 195 mm
Dimensions
- 17" x 12.5" x 16"
- 20" x 15" x 20"
- 20.9" x 17.3" x 24.8"
- 26" x 21" x 27"
- 28.3" x 21.3" x 30.1"
Display
- 3.25" LCD, 0.1 Resolution
- 3.5 inch; Resolution: 320 x 240; Colour: 24 Bit (True Colour)
- 3.75" Touch-Pad LCD, 0.01 Resolution
- 3.75" Touch-Pad LCD, 0.1 Resolution
- 4.3" SmartTouch Touchscreen, 0.01 Resolution
- 7 Segment/5 x 7 Dot Vacuum Florescent Display
- 240 x 128, Back-lit Graphic Display, (White on Blue)
- Digital with 1°C Increments
- LED with 1°C increments
- Monochrome LCD
Display Type
- 0.78" Digits Liquid Crystal Display (LCD) with Backlight
- 2-Line LCD with Backlight
- 4.3" Full-color Touchscreen WQVGA Graphic LCD
- 4.3" Full-color VGA Graphic Touchscreen Display with User-controlled Brightness
- 7" colour TFT touchscreen
- LCD
- LCD Display with white backlight
- LCD display with white backlight
- LCD with backlight
- Revese LCD
Disposable
- Yes
Durometer Hardness
- 55 (Shore A), 15 sec
- 56 (Shore A), 15 sec
- 57 (Shore A), 15 sec
- 60 (Shore A), 15 sec
- 61 (Shore A), 15 sec
- 64 (Shore A), 15 sec
- 65 (Shore A), 15 sec
- 67 (Shore A), 15 sec
- 82 (Shore A), 1 sec
Electrical
- On/Off Switch Separate From Speed Control, Fuse-protected, 6', 3-wire Cord
Electrical Requirement
- 208/240 V, 50/60 Hz
- 115 V, 50/60 Hz
- 115 V, 50/60 Hz, 9.5 A
- 115 V, 50/60 Hz, 16 A, 1 P
- 115 V, 50 Hz
- 115 V, 60 Hz
- 115 V/60 Hz
- 120 V, 50/60 Hz, 8.9 A
- 120 V, 50/60 Hz, 12 A
- 120 V, 50/60 Hz, 18.6 A
- 120 V, 60 Hz
- 120 V, 60 Hz, 310 w
- 120 VAC, 60 Hz, 10 A, Single Phase
- 120 VAC, 60 Hz, 12 A, Single Phase
- 120 VAC, 60 Hz, 13 A, Single Phase
- 208 V, 50/60 Hz, 7.3 A
- 208 V, 50/60 Hz, 11.2 A
- 208 V, 50/60 Hz, 26.4 A
- 208 to 230 VAC, 60 Hz, 13 A, Single Phase
- 208 to 240 VAC, 50/60 Hz, 13 A, Single Phase
- 230 V, 50/60 Hz, 11 A, 1 P
- 230 V, 50/60 Hz, 16.5 A, 3 P
- 230 V; 50/60 Hz
- 240 V, 50/60 Hz, 4.4 A
- 240 V, 50/60 Hz, 6.3 A
- 240 V, 50/60 Hz, 9.3 A
- 240 V, 50/60 Hz, 12.9 A
- 240 VAC, 50 Hz, 6 A, Single Phase
- 240 VAC, 50 Hz, 8 A, Single Phase
- 240 VAC, 50 Hz, 10 A, Single Phase
- 240 VAC, 50 Hz, 12 A, Single Phase
- 240 VAC, 50 Hz, 13 A, Single Phase
Evaporation Flask Rotation Speed
- 10-280 rpm
Evaporation Flask Size
- Up To 5000 ml
Exterior Dimension
- 16 L x 19.8 W x 16.25" H
- 21.75" D x 21.5" W x 56.63"H
- 22.2 L x 20.9 W x 28.3" H
- 22.2 L x 25.2 W x 32.3" H
- 23 L x 24 W x 27" H
- 23.5" D x 23.63" W x 33.5" H
- 25 L x 25 W x 22" H
- 28.94 x 32.76 x 76.77 in. (73.5 x 83.2 x 195 cm)
- 29.1 L x 25.2 W x 36.2" H
- 32.79" D x 29.53" W x 66.61" H
- 41.9 H x 34.9 W x 34 cm D
- 53.9 H x 41.6 W x 48.3 cm D
- 65.1 H x 49.2 W x 47.6 cm D
Exterior Height
- 15"
- 16"
- 20"
- 45 mm
Exterior Length
- 11"
- 17"
- 21"
- 22"
Exterior Width
- 16"
- 35"
- 49"
- 54"
Filter Size
- 55
- 70
- 90
- 124
- 150
- 185
- 240
Fits
- 0.25" dia Motor Shaft
- 0.37" dia Motor Shaft
- 0.83" dia Motor Shaft
- 13 mm Motor Shaft
- 24.8 mm Motor Shaft
- Support Stands from 0.37 to 0.62" dia
- Support Stands from 0.5 to 0.75" dia
Flange Diameter
- 17.1 cm OD
- 23 cm OD
- 27.3 cm OD
- 150 mm ID
- 172 mm ID
- 200 mm ID
- 250 mm ID
Flask Capacity
- 100/125 ml
- 250/300 ml
- 50 ml
- 50 to 500 ml
- 100 ml
- 100 to 5000 ml
- 125 ml
- 150 ml
- 200 ml
- 250 ml
- 300 ml
- 350 ml
- 500 ml
- 500 to 1000 ml
- 500 to 5000 ml
- 600 ml
- 800 ml
- 1000 ml
- 1000 to 5000 ml
- 1200 ml
- 1500 ml
- 2000 ml
- 2000 to 3000 ml
- 2000 to 12000 ml
- 3000 ml
- 3300 ml
- 4000 ml
- 5000 ml
- 5000 to 22000 ml
- 5800 ml
- 8000 ml
- 12000 ml
- 22000 ml
- 50000 ml
- 50000 to 72000 ml
- 72000 ml
For Use With
- 1 L Sep Funnel
- 1 L Series M Mantles
- 1 L Series O Mantles
- 2 L Sep Funnel
- 2 L Series O Mantles
- 2 to 3 L Series M Mantles
- 3 L Series M Mantles
- 3 L Series O Mantles
- 3-place 120 V RJ or RX Heating Mantle
- 5 L Series M Mantles
- 5 L Series O Mantles
- 6-place 120 V RJ or RX Heating Mantle
- 8 mm Motor Shaft
- 9.5 mm Motor Shaft
- 12 L Series M Mantles
- 12 L Series O Mantles
- 12.7 mm Motor Shaft
- 15.9 mm Motor Shaft
- 19 mm Motor Shaft
- 22 L Series M Mantles
- 22 L Series O Mantles
- 50 L Series M Mantles
- 50 ml Series O Mantles
- 50 to 200 ml Series M Mantles
- 72 L Series M Mantles
- 100 V to 120 VAC Moisture Analyzers
- 100 to 200 ml Series O Mantles
- 104A RL3312 Percentage Timer, 104A RL4312 Proportional Voltage or 104A DC312 Digital Controls
- 104A RL3612 Percentage Timer or 104A RL4612 Proportional Voltage or 104A DC612 controls
- 104A RL3612 Percentage Timer, 104A RL 4612 Proportional Voltage or 104A DC612 Digital Controls
- 104A RL3612 Percentage Timer, 104A RL4612 Proportional Voltage or 104A DC612 Digital Controls
- 250 to 300 ml Series O Mantles
- 250 to 500 ml Series M Mantles
- 500 ml Series O Mantles
- 786500 and 786520 Shafts
- AQ4000 Portable Colorimeter
- AQUAfast™ AQ3700 Colorimeter
- AQUAfast™ AQ4000 Colorimeter
- AQUAfast™ AQ4000 Portable Colorimeter
- Activated Carbon
- B-Pure™ Purification Systems
- B-Pure™ Water Purification System
- Balances
- Bantam™ Deionizer, B-Pure™ Water Purification Systems
- Barnstead™ Easypure™ RoDi Systems
- Barnstead™ Water Purification System
- Comparator 2000+, comparator 3000 with non-heated Samples
- Desiccator Stopcock Valve
- Dry-Seal® Vacuum Desiccators
- Everest EW/EK Series Compact Balances
- F42010, F42012, F42020, F42022, F42025, F42027, F41099, F42029 and F42043 Dessicator models
- For 3/16" dia Notched Pestle Rod
- For 0.2 ml PCR Plate/Tube Thermal Block, R31, RC31, R71, V71, R71MD15 AM, R71MHD35 AM, RC31P1502 AM, R31P6 AM Compact Scale
- For 2/4/6 Block Dry Block Heaters, 96-Well or 384-Well Titer Plates
- For 1 and 1.2 L Blender
- For 1 ml Tapered Tissue Grinder
- For 1 x 0.2 ml Centrifuge Rotor Tube
- For 1 x 0.5 ml Centrifuge Rotor Tube
- For 2 ml Potter-Elvehjem
- For 3 ml Tapered Tissue Grinder
- For 4 L Blender Base
- For 4 L CAC70, CAC72, 2610C Container
- For 4.8 to 6.4 mm ID Tubing
- For 5 ml Potter-Elvehjem
- For 5 ml Tapered Tissue Grinder
- For 6 mm Glass Pestle
- For 6 mm dia, 1 x 0.5 ml Centrifuge Rotor Tube
- For 6.4 to 7.9 mm ID Tubing
- For 6.4 to 9.5 mm ID Tubing
- For 7.9 to 12.7 mm ID Tubing
- For 10 ml Potter-Elvehjem
- For 10 mm Glass Pestle
- For 11 mm dia, 1 x 1.5 ml High Speed Centrifuge Rotor Tube
- For 11 mm dia, 1 x 1.5/2 ml Centrifuge Rotor Tube
- For 11 mm dia, 8 x 1.5 ml Centrifuge Rotor Adapter
- For 11 mm dia, 9 x 1.5/2 ml Centrifuge Rotor Adapter
- For 11 mm dia, 48 x 1.5/2 ml Centrifuge Rotor Tube
- For 13.5 mm dia, 1 x 5 ml Centrifuge Rotor Tube
- For 13.5 mm dia, 1 x 7 ml Round Bottom Centrifuge Rotor Tube
- For 15 ml Potter-Elvehjem
- For 15 ml Tapered Tissue Grinder
- For 16 mm dia, 5 x 10 ml Round Bottom Centrifuge Rotor Adapter
- For 17 mm OD, 3 x 15 ml Conical Bottom Centrifuge Rotor Adapter Tube
- For 17 mm dia, 1 x 15 ml Conical Bottom Centrifuge Rotor Tube
- For 17 mm dia, 1 x 15 ml Round Bottom Centrifuge Rotor Tube
- For 17 mm dia, 1 x 15 ml Round Bottom/Conical Centrifuge Rotor Adapter
- For 17 mm dia, 2 x 15 ml Round Bottom Centrifuge Rotor Tube
- For 17 mm dia, 4 x 15 ml Conical Bottom Centrifuge Rotor Adapter
- For 17.5 mm dia, 1 x 15 ml Conical Bottom Centrifuge Rotor Tube
- For 18 mm dia, 1 x 16 ml Round Bottom Centrifuge Rotor Tube
- For 25 mm dia, 1 x 30 ml Round Bottom Centrifuge Rotor Tube
- For 26 mm dia, 1 x 30 ml Round Bottom Centrifuge Rotor Tube
- For 26 mm dia, 2 x 30 ml Round Bottom Centrifuge Rotor Adapter
- For 29 mm OD, 2 x 50 ml Conical Bottom Centrifuge Rotor Adapter Tube
- For 29 mm dia, 1 x 50 ml Conical Bottom Centrifuge Rotor Tube
- For 29 mm dia, 1 x 50 ml Round Bottom Centrifuge Rotor Adapter
- For 29 mm dia, 1 x 50 ml Round Bottom Centrifuge Rotor Tube
- For 30 ml Potter-Elvehjem
- For 30 mm dia, 1 x 50 ml Conical Bottom Centrifuge Rotor Adapter
- For 35 L Conical Oak Ridge 3146, 3148 Tubes
- For 55 ml Potter-Elvehjem
- For 100 ml Centrifuge Rotor Adapter Tube
- For 100 ml Flask
- For 115 V Units ComboMantle
- For 250 to 500 ml Flask
- For 500 ml Round Bottom Flask
- For 500 to 1000 ml Flask
- For 1000 ml Round Bottom Flask
- For 1540 Mixer
- For 1540 Mixer, BDC1850 Overhead Stirrer
- For 1540 Mixer, BDC1850, BDC3030 Overhead Stirrers
- For 1540 Mixer, BDC1850, BDC3030, BDC6015, BDC2002, BDC2010 Overhead Stirrers
- For 2000 ml Round Bottom Flask
- For 2000 to 3000 ml Flask
- For 5000 ml Round Bottom Flask
- For 5000 to 12000 ml Flask
- For 5311-0250 Classic Desiccator, (5309-0250 and 5310-0250) 250 mm Blue Desiccators
- For 12000 ml Round Bottom Flask
- For 22000 ml Flask
- For 22000 ml Round Bottom Flask
- For 30314820 4 x 250 ml ID Swing Out Rotor
- For 30314820 Swing Out Rotor, 4 x 250 ml, ID, Frontier™ Multi-pro Centrifuge
- For 30314822 4 x 100 ml ID Swing Out Rotor
- For 30314823 4 x 100 ml ID Sealable Swing Out Rotor
- For 30314823 Swing Out Rotor, 4 x 100 ml, ID, Sealable, 100 ml Bucket, Frontier™ Multi-pro Centrifuge
- For 30314824 Swing Out Rotors 2 x 3 MTP, ID, Frontier™ Multi-pro Centrifuge
- For 30314828 16 x 50 ml ID Swing Out Rotor
- For 80252042 Printer, EX125D, EX125, EX225D, EX225D/AD, EX225/AD Electronic Balance
- For All 1 L and 1.2 L Blender Bases, All 2 L Blender Bases with the Use of an Adapter (AD2), All MX and TBB Blender Bases with the Use of an Adapter (AD3), All 4 L Blender Bases with the Use of an Adapter (AD1)
- For All 90° Cone
- For Any Blade with an 8 mm dia bore
- For Any Blade with an 8 mm diameter bore
- For Any Caframo Blade
- For Any Caframo Shaft
- For BDC250 Overhead Stirrer
- For BDC1850, BDC3030, BDC6015, BDC2002, BDC2010 Overhead Stirrers
- For BHL120, BHL240 Motor
- For Bead Mill Homogenizer
- For Bituminous Materials
- For CAC70, CAC72, 2610C 4 L Blender Container
- For Caframo 1540 Industrial Mixer
- For Caframo A112, A113, A114 Stand Base
- For Caframo A713, A723, A733, A743, A753 Shaft
- For Caframo BDC1850 or BDC3030 Overhead Stirrers
- For Caframo BDC1850, BDC3030 and BDC6015 Overhead Stirrers
- For Caframo BDC1850, BDC3030, BDC6015, BDC2002 or BDC2010 Overhead Stirrers
- For Caframo Crossover Mixer, 1540 Industrial Mixer
- For Containers Upto 9" dia
- For Containers Upto 16" dia
- For D71P100HL2, D71P15HR5, D71XW300HX2, D71XW60HR1, D71XW15HR1, D71XW100HL2 Bench Scale, R71MHD3 AM, R71MHD6 AM, R71MHD15 AM, R71MD60 AM Compact Scale, T71P AM Indicator
- For DVR2pro Vacuum Pump
- For Density Determination Kit, EX423N, EX1103N, EX223/E, EX124/AD, EX224/AD, EX324/AD, EX224N/AD, EX324N/AD, PX163/E AM, PX323/E AM, PX225D AM, PX523/E Electronic Balance
- For Discs 296430 and 296431
- For Dry Blocks Heater
- For E-Pure 3-holder Systems
- For E-Pure 4-holder Systems
- For EX125D, EX125, EX225D, EX225D/AD, EX225/AD Electronic Balance
- For EX423N, EX1103N, EX4202N, EX10202N, EX10201N, EX224N, EX324N, EX223/E, EX2202/E, EX225D/AD, EX6202/E, EX10202, EX6201/E, EX224N/AD, EX324N/AD Electronic Balance
- For EX423N, EX1103N, EX4202N, EX10202N, EX10201N, EX12001 AM, EX223/E, EX2202/E, EX4202/E, EX6202/E, EX10201, EX224/AD, EX224N/AD, Electronic Balance
- For EX423N, EX1103N, EX10202N, EX125D, EX12001 AM, EX35001 AM, EX2202/E, EX6201/E, EX224/AD, EX324N/AD, EX324/AD, EX223, EX10202, EX423, EX623 Electronic Balance
- For EX423N, EX1103N, EX10202N, EX10201N, EX423/E, EX2202/E, EX124, EX6202/E, EX10201, EX124/AD, EX6201/E, EX224, EX224/AD, EX224N/AD, EX324N/AD, EX324/AD Electronic Balance
- For EX423N, EX1103N, EX10202N, EX12001 AM, EX24001 AM, EX35001 AM, EX124, EX1103, EX2202, EX4202, EX2202/E, EX6202/E, EX10202, EX124/AD, EX224/AD, EX324N/AD Electronic Balance
- For EX423N, EX1103N, EX10202N, EX12001 AM, EX35001 AM, AX2202N/E, AX8201N/E, EX124/AD, AX523N/E, EX225D/AD, PX2202/E AM, PX1602/E, PX2201/E Electronic Balance
- For EX423N, EX10202N, AX1502N/E, EX24001 AM, EX35001 AM, EX2202/E, EX6202/E, AX224/E, AX4202/E, PX2202 AM, PX3202/E AM Electronic Balance, D31P75SD Bench Scale
- For EX423N, EX10202N, EX324N, EX12001 AM, EX225D/AD, EX1103, EX35001 AM, EX35001 AM, EX6202/E, EX6201, EX10202, EX124/AD, EX324/AD, EX224N/AD, EX4202 Electronic Balance
- For EX1103N, AX223N/E, EX225D/AD, EX224N/AD, PX163/E AM, PX225D AM, PAJ1003CN AM, AX523/E, AX423N/E, AX523N/E Electronic Balance
- For EX4202N, EX10202N, EX10201N, EX2202/E, EX6202/E, EX6201/E, EX6202, EX6201, EX10202 EX10201, EX4202/E, EX2202, EX4202 Electronic Balance
- For EX12001 AM, EX24001 AM, EX35001 AM Electronic Balance
- For Electronic Balance, EX12001 AM, EX24001 AM, EX35001 AM Electronic Balance
- For Erlenmeyer Flask
- For Fixed Plate Buchner Funnel
- For Fluorometers
- For Fritted Disc Buchner Funnel
- For Frontier™ 5306 Mini Centrifuge
- For Frontier™ 5515 and 5515R High-speed Microliter Centrifuges
- For Frontier™ 5706 Multi Centrifuge
- For Frontier™ FC5513 Micro Centrifuge
- For Frontier™ FC5707 Micro Centrifuge
- For Frontier™ FC5714, FC5718, FC5718R Multi-pro Centrifuges
- For Frontier™ FC5714, FC5718, FC5718R, FC5816, FC5816R Multi-pro Centrifuges
- For Frontier™ FC5718, FC5718R Multi-pro Centrifuges
- For Frontier™ FC5718, FC5718R, FC5816, FC5816R Multi-pro Centrifuges
- For Frontier™ FC5816, FC5816R Multi-pro Centrifuges
- For Funnel
- For Glas-Col Motor Drives or any 0.31" dia Motor Shaft, 099C L70 Support Stand
- For Glass Griffin Beaker
- For Griffin Beaker
- For HB6AL, HB4AL, HB2AL, HB1AL, HB4DG, HB2DG, HB1DG, HB6DG, HB2DGHL Dry Block Heaters
- For HB6AL, HB4AL, HB2AL, HB1AL, HB4DG, HB2DGHL, HB2DG, HB6DG, HB1DG Dry Block Heaters
- For Hazardous Location Blender
- For Hunter Colorimeter, ACS, Data Color and others
- For LS103A Air Stirrer
- For Lovibond® PFX- and PFXi-195/880/950/995 Spectrophotometric Colorimeter
- For Low-temperature Hotplate, Slide Drying or Custom Drilling to Make a Custom Block, Dry Block Heater
- For MB AX EX Scout-HD, EX423N, STX123 AM, STX222 AM, SPX2201 AM, SJX6201N/E, EX2202/E, EX2202, SPX1202 AM, SKX6201 AM Electronic Balance, MB120 AM Moisture Analyzer
- For MB Series MB90 AM, MB23 AM, MB120 AM, MB27 AM Moisture Analyzer
- For MB Series MB90 AM, MB120 AM, MB23 AM, MB27 AM Moisture Analyzer
- For MB Series, MB23 AM, MB27 AM Moisture Analyzer
- For MB27 AM, MB23 AM Moisture Analyzer
- For MB90 AM, MB120 AM Moisture Analyzer
- For MB90 AM, MB120 AM, MB23 AM, MB27 AM Moisture Analyzer
- For Metal Beaker
- For Mini Vortex Mixer
- For Mini Vortex Mixer, Single Tube Holder
- For Model Fs, PFXi/PFX195, 880, 950 and 995 Instruments
- For Ohaus Analog Rocking Shaker
- For Ohaus Analog Rocking and Waving Shaker
- For Ohaus Analog/Digital 16 kg Shakers
- For Ohaus Analog/Digital 16 kg Shakers and Reciprocating Shakers
- For Ohaus Analog/Digital 16 kg Shakers, Digital Reciprocating Shakers, Analog/Digital 23 kg Shakers, Digital 45 kg Shakers
- For Ohaus Analog/Digital 16 kg Shakers, Reciprocating Shakers and Analog/Digital 23 kg Shakers
- For Ohaus Analog/Digital 16 kg and 23 kg Shakers and Reciprocating Shakers
- For Ohaus Analog/Digital 16, 23, 45 and 68 kg Shakers
- For Ohaus Analog/Digital 23 kg Shakers
- For Ohaus Analogue/Digital 16 and 23 kg Shakers and Reciprocating Shaker
- For Ohaus Analogue/Digital 16 kg Shakers and Reciprocating Shaker
- For Ohaus Digital 4 kg Shakers
- For Ohaus Digital 45 kg Shakers
- For Ohaus Digital 68 kg Shakers
- For Ohaus Digital Rocking Shaker
- For Ohaus Digital Waving Shaker
- For Ohaus Open Air 4 kg Orbital Shaker
- For Ohaus Open Air Digital 4 kg Shakers, Analog/Digital 16 kg Shakers, Digital Reciprocating Shakers, Analog/Digital 23 kg Shakers, Digital 45 kg Shakers
- For Ohaus Open Air Digital 4 kg Shakers, Incubating 4 kg Shakers, Analog/Digital 16 kg Shakers, Digital Reciprocating Shakers, Analog/Digital 23 kg Shakers, Digital 45 kg Shakers
- For Ohaus SHHD2325DG, SHHD2325AL, SHHD1619DG, SHHD1619AL US Heavy Duty Shaker, SHEX1619DG US Extreme Shaker
- For Ohaus SHHD6850DG, SHHD4550DG, SHHD6825DG, SHHD4525DG US Heavy Duty Shaker
- For Ohaus SHLD0415DG, SHLD0403DG US Light Duty Shaker
- For Ohaus SHLD0415DG, SHLD0403DG US Light Duty Shaker, Digital 4 kg Open Air Orbital Shakers
- For Ohaus® HB6AL, HB4AL, HB2AL, HB1AL, HB4DG, HB2DGHL, HB2DG, HB6DG, HB1DG Dry Block Heaters
- For Overhead Stirrer
- For PAJ2102N, PAJ3102N, PAJ4102N, PAJ4101N, PAJ812CN, PAJ2102CN, PAJ4102CN, PAJ603CN AM, PAJ1003CN AM, PAJ2003CN AM, PAJ812N Electronic Balance
- For PAJ2102N, PAJ4102N, EX1103 TAJ4001 AM, Electronic Balance, VN31P5000X, VN31P5000L Floor Scale, D51XW10WR3, D71P100QL5, D71XW100WL4, D71P150HX2 Bench Scale
- For Pear-Shaped Flask
- For Polished 10 mm Glass Stirrer Shafts
- For Potter-Elvehjem Micro Tissue Grinder
- For Precision 10 mm Ground Glass Stirring Shafts
- For Precision Ground-stirring Shaft
- For R71MHD3 AM Compact Scale, R71MD35 AM, R71MD60 AM, R71MHD15 AM, R71MHD6 AM, EX35001 AM Electronic Balance
- For R71MHD3 AM, R71MD3 AM, R71MD6 AM, R71MD15 AM, R71MD35 AM, R71MHD6 AM, R71MHD15 AM, R71MHD35 AM, R71MD60 AM Compact Scale
- For R71MHD3 AM, R71MD3 AM, R71MD6 AM, R71MD15 AM, R71MD35 AM, R71MHD6 AM, R71MHD15 AM, R71MHD35 AMR71MD60 AM
- For R71MHD3 AM, R71MD3 AM, R71MD6 AM, R71MD15 AM, R71MHD6 AM, R71MHD15 AM, R71MHD35 AM, R71MD60 AM Compact Scale
- For RC41M30 AM, R41ME15 AM, RC41M6 AM, V71P1502T AM, V71P3T AM, R71MHD35 AM, R71MD60 AM, R71MD3 AM, V71P30T AM, RC31P30 AM Counting Scale
- For RO-TAP® RX-29 and RX-30 Parts
- For RO-TAP® RX-94, RX-29 and RX-30 Test Sieve Shaker
- For RS232 Interface, For STX123 AM, STX223 AM, STX222 AM, STX421 AM, STX2201 AM, SPX8200 AM Electronic Balance, ST3100M-B, ST3100M-F, ST3100M-N Multi-Parameter Analyzer, SJX1502N/E, STX422 AM, STX2202 AM, STX8200 AM, Electronic Balance
- For RX-29 RO-TAP® Sieve Shaker Maintenance Kits
- For RX-29 and RX-30, RO-TAP® Sieve Shaker Maintenance Kits
- For RX-29 and RX-30, RO-TAP® Sound Enclosure Cabinet and Test Stand
- For Resin Flask
- For Resin Reaction Flask
- For Round Bottom Flasks
- For Round Bottom Glass Flask with Proportional Voltage Control Package
- For Round Bottom Spherical Glass Flask
- For SF40A, AM, Printer, Impact, AX422/E, AX822/E, AX2201/E, AX622N/E, AX1502N/E, AX8201N/E, AX2202N/E, AX124, AX224, AX124/E, AX224/E, AX324, AX523, AX523/E, AX324, Electronic Balance
- For SS510C and SS515 Containers
- For SS510C and SS515 Cool Base Containers
- For STP-103 Thermal Printer, EX423N, EX10202N, AX8201N/E, AX4202N/E, EX324N/AD, AX1502/E, AX224/E, AX4202/E, AX423N/E, AX523N/E Electronic Balance
- For STP-103, US Thermal Printer, AX422/E, AX2201/E, AX223N/E, AX1502N/E, AX124/E, AX224/E, AX8201/E, AX324, AX1502/E, AX4202N/E, AX2202/E, AX4202 Electronic Balance
- For STX123 AM, STX223 AM, STX222 AM, SPX2201 AM, SKX8200 AM, SJX6201N/E, STX1202 AM, STX8200 AM, SPX223 AM, SPX2202 AM, KX2201 AM, SKX6201 AM Electronic Balance
- For STX123 AM, STX223 AM, STX2201 AM, SPX422 AM, SPX2201 AM, SPX8200 AM, SKX622 AM, SJX622N/E, STX1202 AM, STX6201 AM, STX8200 AM, SPX1202 AM, SPX621 AM Electronic Balance
- For STX123 AM, STX223 AM, STX2201 AM, SPX622 AM, SPX6201 AM, SKX622 AM, SJX1502N/E, SJX1502N/E, STX8200 AM, SPX223 AM, SPX621 AM, SKX6201 AM Electronic Balance
- For STX123 AM, STX223 AM, STX2201 AM, SPX8200 AM, SJX622N/E, SJX1502N/E, STX1202 AM, STX6201 AM, SPX123 AM, SPX2202 AM, SPX621 AM, SKX2201 AM, SKX6201 AM Electronic Balance
- For STX123 AM, STX2201 AM, SPX2201 AM, SPX8200 AM, SKX8200 AM, SJX622N/E, STX6201 AM, STX8200 AM, SPX1202 AM, SPX621 AM, SKX421 AM, STX622 AM, STX2202 AM Electronic Balance
- For SWB1122 and RSWB3222 Lindberg/Blue M Circulating Water Bath
- For Sample/Serum and Scintillation Vials, Dry Block Heater
- For Scout SPX, STX, SKX and SJK Balances STX123 AM, STX421 AM, STX2201 AM, SKX2202 AM, SJX323N/E, STX422 AM, STX1202 AM, STX6201 AM, STX8200 AM, SKX2201 AM Electronic Balance
- For Scout SPX, STX, SKX and SJX, STX222 AM, STX2201 AM, SPX622 AM, SPX6201 AM, SKX622 AM, SJX622N/E, STX6201 AM, SPX2202 AM, STX1202 AM Electronic Balance
- For Scout SPX, STX, SKX, SJX, STX222 AM, STX621 AM, SPX422 AM, SPX6201 AM, SJX323N/E, STX422 AM, STX6201 AM, SPX1202 AM, SPX621 AM, SKX2201 AM Electronic Balance
- For Smart2Pure, Water Purification Systems
- For Soda Lime Desiccator
- For Spectrophotometers
- For Spectrophotometers and Colorimeters
- For Spectrophotometers and Photometers
- For Spherical Bottom Centrifuge Bottle, Standard Centrifuge Rotor
- For Spherical Flask
- For Stirrer
- For Stirrers
- For TJ611, 730-00, 750-S0, 1610-00, 310-00, 710-T0, 760-00 Mechanical Scale, EX224N/AD, EX324N/AD, EX2202/E, EX4202/E, NVL20000/1 AM, NVT16000N/1 AM, NVL1101/1 AM Electronic Balance
- For Tapered Tissue Grinder
- For Tapered Tissue Grinder With Steel Rod
- For VN31P5000L, VN31P5000X Floor Scale, D71P150HX5, D71P30HR1, D51P300HX5, D71P30HR5, D71P100QL2, D31P60BL AM Bench Scale, T51P AM, T71P AM, T32MC AM Indicator
- For VN31P5000L, VN31P5000X Floor Scale, EX10201N, EX224N AX8201 Electronic Balance, T51P AM, T71P AM Indicator, R31P30 AM, R31P3 AM Compact Scale
- For VN31P5000L, VN31P5000X, D71P15HR1, D71P150HX5, D51P30HR5, D51P250QX5, D51P60HL5, D71P250QX5 Bench Scale, T51P AM, T71P AM, T31P AM, T32MC AM Indicator
- For VX Series
- For VX32XW5000X Floor Scale
- For VX32XW10000X, VX32XW2500L Floor Scale, D32XW150VL AM, D71XW25WR3, D51XW250WX4, D71XW250WX4 Bench Scale, T72XW AM, T51XW AM, T32XW AM Indicator
- For Vacuu-View Extended Vacuum Pump
- For Vacuu-View Vacuum Pump
- For Vortex-Genie® Mixer and Mini Vortex Mixer
- For WB1120, RWB3220
- For WB1130
- For WB1140
- For Wax
- Handheld Multiparameter Colorimeter
- Lindberg/Blue M™ Multi-Purpose Circulating Baths for WB1110 Models
- Lindberg/Blue M™ Multi-Purpose Circulating Baths for WB1120, RWB3220 Models
- Lindberg/Blue M™ Multi-Purpose Circulating Baths for WB1130 Models
- Lindberg/Blue M™ Multi-Purpose Circulating Baths for WB1140 Models
- Lindberg/Blue M™ Water Baths for Model WB1120
- Moisture Analyzers
- Newton EJ Series Portable Balances
- Orion™ AquaMate™ 8000 UV-Vis Spectrophotometer, Orion™ AquaMate™ 7000 Vis Spectrophotometer, Orion AQUAfast AQ3700 Colorimeter
- PS Polishing Station Series 90005, 90006 and 90007 Model
- S20 Pestle, Glas-Col Tissue Homogenizing Systems
- S21 Pestle, Centrifuge Use, Glas-Col Tissue Homogenizing Systems
- S21 Pestle, Glas-Col Tissue Homogenizing Systems
- S21G Pestle, Glas-Col Tissue Homogenizing Systems
- S22 Pestle, Glas-Col Tissue Homogenizing Systems
- S23 Pestle, Glas-Col Tissue Homogenizing Systems
- S24 Pestle, Glas-Col Tissue Homogenizing Systems
- S26 Pestle, Glas-Col Tissue Homogenizing Systems
- S29 Pestle, Glas-Col Tissue Homogenizing Systems
- S30 Tubes, L11 Quick-change Chuck, Motor Drives
- S31, S35, S38 Tubes, L11 Quick-change Chuck, Motor Drives
- S32 Tube, L11 Quick-change Chuck, Motor Drives
- S33, S37 Tubes, L11 Quick-change Chuck, Motor Drives
- S34 Tube, L14, L15 Flex-grip Motor Chuck
- S36 Tube, L14, L15 Flex-grip Motor Chuck
- S37, S39 Tubes, L11 Quick-change Chuck, Motor Drives
- S39 Tube, L14, L15 Flex-grip Motor Chuck
- S600 Shaker
- Series M, TM, or STM Mantles, 1-, 2-, and 3-neck Flasks
- Stacking Two Platforms, MaxQ™ 30100 and MaxQ™ 30110 Platform
- Stirrer
- Stirrer Motors
- Thermo Scientific MediLite™ Centrifuge
- Thermo Scientific™ Sorvall™ Legend™ X1, Sorvall ST 16, Heraeus™ Multifuge™ X1, Heraeus™ Megafuge™ 16 and SL 16 Centrifuges; TX-400 Rotor
- Thermo Scientific™ Sorvall™ Legend™ X1, Sorvall ST 16, Sorvall ST 8, Heraeus™ Multifuge™ X1, Heraeus™ Megafuge™ 16, Heraeus™ Megafuge™ 8, SL 16 and SL 8 Centrifuges
- Utility tray, MaxQ™ 2000, 2506, 2508, 4000, 6000 Shaker
- Utility tray, MaxQ™ 2000, 2506, 2508, 4450 Shaker
For Use With Application
- Adding and Removing Substances to Determine Precise Weight
- Determining the Weight of Solid Samples
- For Balances, Microwave Moisture Analyzers, Hundreds of other Sample Handling
- For Evaporating Dish, Weighing Dish, Parts Container, Dust Cover and More
- For General Purpose Weighing and Dispensing
- For General Purpose Weighing, Dispensing, Storage and Drying
- For Liquids (Compatible with Cenco Moisture Analyzer)
- For Measured Pouring and Dispensing
- For Microbalances, Organic Micro Elementary and Thermal Analysis and Pharmaceutical Use
- For Ohaus Balances and Moisture Analyzers or any Flat-Top Balance
- For Ohaus® MB Series Moisture Analyzer
- For Ohaus® MB90 AM, MB23 AM, MB120 AM, MB27 AM MB Series Moisture Analyzer
- For Pouring and Dispensing
- For Sampling, Weighing, Dispensing, Storage, Environmental Clean-Up, Food Processing, Evaporating or General Laboratory Use
- For Solids (Compatible with Cenco Moisture Analyzer)
- For Storage, Dispensing, General Purpose Sampling and Testing
- For Weighing, Dispensing or Pouring Liquids or Solids
- General Micro Work and also Used as a Container for Hygroscopic Materials
- Milligram Weighing
- Standard Analytical Balance
- Weighing Small Samples of Coal
For Use With Equipment
- 10-pin and 32-pin Inserts
- FlaskScrubber™ and SteamScrubber™ Washers
- FlaskScrubber™, FlaskScrubber™ Vantage Series Glassware Washer
- FlaskScrubber™, FlaskScrubber™ Vantage Series, SteamScrubber™ Glassware Washers
- FlaskScrubber™, SteamScrubber™ Glassware Washer
- Washers
Form
- Granular
- Powder
Fragrance
- 3x Clove Scent
- Cherry
- Clove
- Lemon
- Pine
Frequency
- 50/60 Hz
- 50 Hz
- 60 Hz
Funnel Type
- Globe
- Squibb
Graduation Intervals
- 0 to 1 in 0.1
- 0 to 1 in 0.1, 2 to 10 in 1
- 0 to 1 in 0.1, 2 to 15 in 1
- 0 to 1 in 0.1, 2 to 25 in 1
- 0 to 2 in 0.1 and at 3 and 4
Handle Material
- Plastic
- Stainless Steel
Heating Bath Temperature
- 20-210°C
Heating Mode
- Standard/Quick
- Standard/Quick/Step/Ramp
Height
- 0.3"
- 2"
- 2.5 mm
- 2.56"
- 2.7 mm
- 3.5 mm
- 3.6"
- 3.8"
- 3.9"
- 3.94"
- 4 in
- 4"
- 4.1 cm
- 4.3 in
- 4.38"
- 4.4 in
- 4.5 mm
- 4.5"
- 4.62"
- 4.8 in
- 5"
- 5.1 cm
- 5.25"
- 5.5"
- 5.7 cm
- 5.8"
- 5.88"
- 5.9"
- 6 mm
- 6"
- 6.3"
- 6.4 cm
- 6.5"
- 6.7"
- 7 mm
- 7"
- 7.3"
- 7.6 cm
- 7.75"
- 8 mm
- 8"
- 8.3"
- 8.6"
- 8.9"
- 9"
- 9.1"
- 9.2"
- 9.375"
- 9.5 cm Interior, 41.9 cm Exterior
- 9.63"
- 9.8 cm Interior, 36 cm Exterior
- 9.88"
- 10"
- 10.32"
- 10.4 cm
- 10.8 cm Interior, 37 cm Exterior
- 11.5"
- 12"
- 12.1"
- 12.2 cm
- 12.2"
- 12.7 cm
- 12.9"
- 13"
- 14 mm
- 14"
- 14.1"
- 15 mm
- 15"
- 16"
- 16.2"
- 16.5"
- 17 cm
- 17.8"
- 18 cm Interior, 53.3 cm Exterior
- 18"
- 19 mm
- 20.6 cm
- 21.3 cm
- 22.25"
- 24 mm
- 24 to 35 mm
- 24.3"
- 25 cm
- 25 mm
- 25.4 cm
- 25.4"
- 26 cm
- 26.2 cm
- 26.9"
- 28"
- 30 to 35 mm
- 30 to 50 mm
- 31.1 cm
- 31.4 cm
- 33 to 82 mm
- 34.5 cm
- 35 mm
- 36 cm Interior, 74.9 cm Exterior
- 40 to 52 mm
- 40 to 62 mm
- 41.7 cm
- 42 cm
- 42.1"
- 46 cm
- 48"
- 50 to 62 mm
- 50 to 64 mm
- 50 to 68 mm
- 50 to 72 mm
- 50 to 76 mm
- 51.8 cm
- 56 cm
- 57 mm
- 57.2 cm
- 60 cm
- 60 to 72 mm
- 60 to 85 mm
- 60 to 88 mm
- 61 cm
- 80 to 94 mm
- 80 to 106 mm
- 100 mm
- 100 to 114 mm
- 105 mm
- 113 mm
- 122 mm
- 126 mm
- 129 mm
- 130 mm
- 140 mm
- 160 mm
- 170 mm
- 178 mm
- 180 mm
- 185 mm
- 200 mm
- 205 mm
- 220 mm
- 252 mm
- 255 mm
- 305 mm
- 310 mm
- 330 mm
- 351 mm
- 354 mm
- 359 mm
- 457 mm
- 540 mm
- 545 mm
Hertz
- 50/60 Hz
- 60 Hz
Holds
- 1 x 125 ml, 8 x 250 ml, 6 x 500 ml, 3 x 1000 ml Flasks
- 3 Flasks
- 6 Flasks
- 8 Flasks
- 11 Flasks
- 12 Slides
- 20 Slides (20-place)
- 22 Flasks
- 25 Slides
- 25 x 25 ml or 23 x 50 ml Flasks
- 35 Flasks
- 50 Slides
- 100 Slides
- 200 Flasks
- 200 Slides (100 Slots)
- Upto 10 Cabinets
- Upto 72 Slides
- Upto 4500 Slides
Horse Power
- 1/50
- 1/40 Hp
- 1/18
- 1/17 Hp
- 1/15
- 1/8 Hp
- 1/5
- 1 Hp
- 1.8 Hp
Horsepower
- 0.4 Hp
- 0.5 Hp
- 0.7 Hp
- 3/4 Hp
- 3.75 Hp
Includes
- D0835 Pretreatment (1), D0803 High Capacity (1), D5027 Ultrapure (2)
- D0835 Pretreatment (1), D5027 Ultrapure (2)
- D0836 Macropure (1), D0803 High Capacity (1), D5027 Ultrapure (1), D5021 Organic Free (1)
- D0836 Macropure (1), D5027 Ultrapure (1), D5021 Organic Free (1)
- Pre-filter, Ultrapure Mixed Bed Cartridge and EasyPure High Purity/Low TOC Cartridge
Inside Depth
- 0.66"
- 0.81"
- 1.06"
- 1.09"
- 1.13"
- 1.2"
- 1.22"
- 1.25"
- 1.43"
- 1.5"
- 1.56"
- 1.59"
- 1.63"
- 1.75"
- 1.88"
- 1.89"
- 1.94"
- 1.95"
- 2"
- 2.24"
- 2.31"
- 2.38"
- 2.5"
- 2.67"
- 2.69"
- 2.81"
- 3"
- 3.25"
- 3.5"
- 3.59"
- 3.6"
- 3.63"
- 3.75"
- 3.85"
- 4.06"
- 4.25"
- 4.5"
- 4.58"
- 4.63"
- 5.25"
- 5.5"
- 5.63"
- 5.81"
- 6"
- 6.25"
- 6.27"
- 6.5"
- 7"
- 7.25"
- 7.31"
- 7.71"
- 8"
- 8.25"
- 8.5"
- 8.63"
- 9"
- 9.25"
- 9.75"
- 10"
- 10.25"
- 11"
- 347"
Inside Diameter
- 3.75"
- 5"
- 5.19"
- 5.75"
- 6.13"
- 6.38"
- 7.5"
- 7.63"
- 9.25"
- 9.81"
- 10.19"
- 11.13"
- 11.5"
- 12.25"
- 15"
- 16.75"
- 18"
- 19.25"
- 24.25"
- 26.88"
- 27"
Interior Dimension
- 10 H x 10 W x 12" D
- 11 H x 12 W x 11" D
- 14 H x 14 W x 20" D
- 18.9 H x 12.9 W x 16.4" D
- 20 H x 13.5 W x 13.9" D
- 20 H x 14.5 W x 13.9" D
- 22.5 x 26.5 x 69 in (57.15 x 67.3 x 175.26 cm)
- 22.8 H 17.2 W x 16.3" D
- 22.8 H x 17.2 W x 15.3" D
- 23.5 H x 28.6 W x 24.8 cm D
- 23.9 H x 13.5 W x 18.3" D
- 23.9 H x 14.5 W x 18.3" D
- 26.8 H x 17.2 W x 22.2" D
- 26.8 H x 17.2 W x 23.2" D
- 27.9 H x 20.4 W x 18.3" D
- 27.9 H x 21.4 W x 18.3" D
- 35.6 H x 35.6 W x 37.8 cm D
- 46.7 H x 43.2 W x 37.8 cm D
- Refrigerator: 17" D x 17.5" W x 36.5" H; Freezer: 16" D x 15.5" W x 10.38" H
- Refrigerator: 25.5" D x 25" W x 40" H; Freezer: 20.5" D x 22.5" W x 15.75" H
- Refrigerator: 17" D x 20.5" W x 19.5" H; Freezer: 11.5" D x 19" W x 5" H
Internal Resolution
- 1 million
- 5 million
Jaw Type
- Curved
- Straight
Joint Clearance
- 24/40
- 29/42
- 34/45
- 45/50
Joint Size
- 24/40
- 24/40 Standard Taper Joint
- 29/42
- 34/45 Standard Taper Joint
Length
- 0.6"
- 1.5 m
- 2 mm
- 3 mm
- 3"
- 3'
- 3.5"
- 3.75"
- 4"
- 4'
- 4.3"
- 4.4"
- 4.5"
- 5 mm
- 5"
- 5'
- 5.12"
- 5.37"
- 5.5"
- 5.6 mm
- 5.75"
- 6'
- 6.125"
- 6.4 mm
- 6.5"
- 6.6"
- 7 mm
- 7"
- 7'
- 7.5"
- 7.63"
- 7.9 mm
- 7.9"
- 8 mm
- 8'
- 9 m
- 9'
- 9.1"
- 9.25"
- 9.5
- 9.5 cm
- 9.5 mm
- 9.7"
- 10 mm
- 10"
- 10'
- 10.4 in
- 10.4 mm
- 11"
- 11.1"
- 11.42"
- 11.5"
- 12 mm
- 12"
- 12.2 in
- 12.5 in
- 12.5 mm
- 12.7 mm
- 13 mm
- 13"
- 14"
- 14.7 cm
- 15 m
- 15 mm
- 15"
- 15.2 cm
- 15.37"
- 15.4"
- 15.5"
- 15.6 cm
- 15.9 mm
- 16 mm
- 16.2"
- 16.3"
- 16.5 cm
- 16.7"
- 16.8"
- 17"
- 17.3"
- 18 cm
- 18"
- 18.9"
- 19 mm
- 19.1 mm
- 20 cm
- 20 mm
- 20'
- 21.3"
- 21.6 cm
- 21.8 cm
- 22 mm
- 22"
- 22.1"
- 22.2 mm
- 22.4"
- 23.2"
- 24 mm
- 24"
- 24" Shaft
- 25 mm
- 25"
- 25'
- 25.4 mm
- 26 mm
- 26.5"
- 28 mm
- 28" Shaft
- 28.6 mm
- 28.7"
- 29.3"
- 29.7 cm
- 29.9 cm
- 30 mm
- 30"
- 31 mm
- 31.8 cm
- 31.8 mm
- 32 mm
- 32.4 cm
- 33 cm
- 33 cm Exterior
- 34.9 mm
- 35 cm
- 35 mm
- 35.6 cm
- 35.8"
- 36"
- 38 mm
- 38.1 mm
- 40 cm Exterior
- 40 mm
- 40 to 45 mm
- 40.1 cm
- 41 mm
- 41.3 mm
- 42 mm
- 44.5 mm
- 45 cm
- 45 mm
- 45.7 cm
- 45.7 cm Exterior
- 47.6 mm
- 48"
- 49 mm
- 50 mm
- 50'
- 50.8 mm
- 51 cm Exterior
- 51 mm
- 55 mm
- 57 mm
- 60 mm
- 61 cm
- 61.9 cm
- 63.5 mm
- 64 mm
- 64.7 cm Exterior
- 66 mm
- 70 mm
- 74 to 219 mm
- 75 mm
- 76 mm
- 76.2 cm
- 76.2 mm
- 76.4 cm
- 80 mm
- 84 mm
- 86 mm
- 91.4 cm
- 93 mm
- 93.7 cm
- 100'
- 101.6 mm
- 102 mm
- 108 mm
- 114 mm
- 118 to 166 mm
- 125 mm
- 125"
- 127 mm
- 130 mm
- 138 mm
- 144 mm
- 150 mm
- 152 m
- 159 mm
- 187 mm
- 203 mm
- 294 mm
- 300 mm
- 304 mm
- 312 mm
- 316 mm
- 323 mm
- 330 mm
- 341 mm
- 350 mm
- 361 mm
- 400 mm
- 419 mm
- 440 mm
- 445 mm
- 456 mm
- 460 mm
- 493 mm
- 499 mm
- 500 mm
- 515 mm
- 538 mm
- 590 mm
- 600 mm
- 700 mm
- 731 mm
- 760 mm
- 900 mm
Lift
- Hand Lift
- Motor Lift
Light Path
- 1 cm
- 10 mm
Linearity
- ±0.002 g
- ±0.003 g
- ±0.01 g
- ±0.01/0.02/0.05 g
- ±0.02 g
- ±0.03 g
- ±0.1 g
- ±0.1/0.2/0.5 g
- ±0.2 g
- ±1/2/5 g
- ±1 g
- ±2 g
- 0.002 g
- 0.02 g
- 0.2 g
Magnetic Type
- Alnico
- Radial Magnet
- Samarium Cobalt
Mantle Size
- 1 L
- 2 L
- 2 to 3 L
- 3 L
- 5 L
- 12 L
- 22 L
- 50 L
- 50 ml
- 50 to 200 ml
- 72 L
- 100 to 200 ml
- 250 to 300 ml
- 250 to 500 ml
- 500 ml
Material
- 2 kg is 316 Stainless Steel;≤1 kg are Troemner Alloy 8
- 2 kg weight is 316 Stainless Steel. 100 g weight is Troemner Alloy 8
- 5 kg weight is 316 Stainless Steel. 200 g weight is Troemner Alloy 8
- 303 Stainless Steel
- 304 Stainless Steel
- 304 Stainless Steel Pin, Plastic Tip
- 316 Stainless Steel
- 316L Stainless Steel
- 316L Stainless Steel Blade, 316 Stainless Steel Shaft
- 316L Stainless Steel Impeller, Silicone Sweep
- 420 Stainless Steel
- ABS Plastic
- Acrylic
- Aluminum
- Aluminum Mast
- Aluminum Tray
- Aluminum and Steel
- Anodized Aluminum
- Borosilicate Glass
- Borosilicate Glass Encapsulated
- Borosilicate Glass, PTFE Blade
- Brass
- Cast Zinc-aluminum Alloy Coated with Chemical Resistant Epoxy Paint
- Cellulose
- Ceramic Metal
- Chemical-resistant Polyurethane
- Co-polyester
- Cold Rolled Steel
- Die Cast Zinc Base, Glass Container
- Die Cast Zinc Base, Stainless Steel Container
- Electropolished 304 Stainless Steel
- Epoxy Coated Die Cast Zinc Base, Glass Container
- Epoxy Coated Metal Base, Glass Container
- Epoxy Coated Metal Base, Stainless Steel Container
- Fabric
- Fluoroelastomer
- Foam
- Glass
- Glass Fabric Exterior
- Glass, Stainless Steel
- Glass-fabric
- Heavy-duty Metal
- High Impact Polystyrene (HIPS)
- LDPE
- Low Nitrogen Parchment Paper
- Metal
- Metal Body
- Methacrylate
- Neoprene
- Optical Glass
- PMMA
- PTFE
- PTFE Blade, Stainless Steel Shaft Core
- PTFE Covering
- PTFE Glass Reinforced
- PTFE Rod
- PVC
- Passivated 316L Stainless Steel
- Plastic
- Plastic, Type 304 Stainless Steel Clip
- Plexiglass®, Plastic, Aluminum Base
- Polycarbonate
- Polycarbonate ABS
- Polycyclical Olefin
- Polyethylene
- Polymer
- Polypropylene
- Polypropylene Bottom, Polycarbonate Top
- Polystyrene
- Polyurethane
- Porcelain
- Powder-coated Heavy-gauge Stainless Steel
- Quartz
- Rubber
- Sand
- Silicone
- Silicone Impregnated Glass Fabric Exterior
- Silicone Rubber
- Silicone SCX 0570
- Soda-Lime Glass
- Solid PTFE
- Stainless Steel
- Stainless Steel Container
- Stainless Steel Powder-coated Mast, Cast Iron Base
- Stainless Steel, Glass
- Stainless Steel, Wooden Handle
- Stainless steel, Brass Cone
- Steel
- Steel Ring
- Steel, Aluminum Basket Strap
- Steel, Fabric Strap Basket
- TFE/ETFE
- Troemner Alloy 8
- Tygon
- Vinyl
- Zinc Nickel Plated
Maximum Capacity
- 2 x 3 MTP
- 4 x 0.2 ml PCR8
- 4 x 8-w PCR Strip
- 4 x 85 ml
- 4 x 100 ml
- 4 x 250 ml
- 6 x 5 ml
- 6 x 50 ml
- 6 x 85 ml
- 6 x 250 ml
- 8 x 1.5/2 ml
- 8 x 15 ml
- 10 x 50 ml
- 12 x 1.5/2 ml
- 12 x 5 ml
- 12 x 15 ml
- 16 x 50 ml
- 20 x 10 ml
- 24 x 1.5/2 ml
- 24 x Capillaries
- 30 x 1.5/2 ml
- 30 x 15 ml
Maximum Pump Pressure
- 1.3 mbar
Maximum RCF
- 1228 x g
- 1817 x g
- 2176 x g
- 2560 x g
- 2830 x g
- 3350 x g
- 3735 x g
- 3780 x g
- 3885 x g
- 4427 x g
- 4445 x g
- 4997 x g
- 10016 x g
- 14809 x g
- 15342 x g
- 15343 x g
- 15775 x g
- 15869 x g
- 16022 x g
- 16058 x g
- 17317 x g
- 19150 x g
- 19978 x g
- 20595 x g
- 20984 x g
- 21726 x g
- 23542 x g
Maximum Speed
- 3100 rpm
- 4000 rpm
- 4500 rpm
- 5000 rpm
- 5650 rpm
- 6000 rpm
- 6800 rpm
- 8000 rpm
- 10500 rpm
- 12000 rpm
- 13000 rpm
- 13500 rpm
- 14000 rpm
- 14500 rpm
- 15000 rpm
- 18000 rpm
Measurement Mode
- Moisture Content/Dry Content/Ratio/Weight
Measuring Limit
- 0.001 to 1100 mbar
- 0.1 to 1100 mbar
- 1 to 1080 mbar
Measuring Range
- 0 to 1 mg/L Cl2
- 0 to 2 mg/L Cl2
- 0 to 4 mg/L Cl2
- 2 to 18% NaOCl
- 6 to 7.6
- 6.5 to 8.4
Mesh Size
- 4
- 6
- 8
- 10 to 20
Model
- FG-K
- FG-KN
- HSMNHP4CFT
- MD 1C
- MD 4C NT +2AK
- MD 4C NT +AK+EK
- MD1C +AK+EK
- MD4C NT
- MD4C NT SynchroTM
- ME1C
- ME2 NT
- ME2C NT
- ME4 NT
- ME4C NT
- ME8 NT
- ME8C NT
- MZ1C
- MZ2C NT
- MZ2C NT +2AK
- MZ2C NT +AK+M+D
- MZ2C NT SynchroTM
- Orbitron I
- Orbitron II
- PC 3001 VARIO® Select
- PC 3003 VARIO
- PC 3004 VARIO
- PC-170
- PC-600D
- PC101 NT
- PC201 NT
- PC510 NT
- PC511 NT
- PC520 NT
- PC610 NT
- PC620 NT
- PC3002 VARIO
- R-A4x85/12MI
- R-A4xPCR/6
- R-A4xPCR/15
- R-A4xPCR/15I
- R-A6x50/13MI
- R-A6x85/14MI
- R-A6x85/13MI
- R-A6x50/6M
- R-A6x50/6MI
- R-A6x250/8MI
- R-A8x2/6M
- R-A8x15/7M
- R-A10x50/10MI
- R-A12x2/18MI
- R-A12x5/14MS
- R-A12x15/6M
- R-A12x15/6MI
- R-A20x10/12MI
- R-A24x2/13MSb
- R-A24xCAP/12b
- R-A30x2/14MIS
- R-A30x2/13MS
- R-A30x15/4MI
- R-S4x100/5MIS
- R-S4x100/4MI
- R-S4x250/4MI
- R-S6x5/4
- R-S6xMTP/4MI
- R-S16x50/4MI
- R71MD3
- R71MD6
- R71MD15
- R71MD35
- R71MD60
- R71MHD3
- R71MHD6
- R71MHD15
- R71MHD35
- SAFE-T HP6
- SHRK04DG
- SHRK07AL1
- SHRK07AL2
- SHWV02AL
- SHWV02DG
- SPX123
- SPX222
- SPX223
- SPX421
- SPX422
- SPX621
- SPX622
- SPX1202
- SPX2201
- SPX2202
- SPX6201
- SPX8200
- STX123
- STX222
- STX223
- STX421
- STX422
- STX621
- STX622
- STX1202
- STX2201
- STX2202
- STX6201
- STX8200
- V41PWE3T
- V41PWE6T
- V41PWE15T
- V41PWE1501T
- V41XWE3T
- V41XWE6T
- V41XWE15T
- V41XWE1501T
- e-G21HP04C
- e-G21HP07C
- e-G21HPRDS
Modules
- 3
- 4
Mortar Size
- 4 OD x 65 mm L
- 11 OD x 45 mm L
- 11 OD x 49 mm L
- 11 OD x 86 mm L
- 13 OD x 66 mm L
- 13 OD x 93 mm L
- 16 OD x 74 mm L
- 18 OD x 114 mm L
- 19 OD x 84 mm L
- 24 OD x 118 mm L
- 30 OD x 130 mm L
- 35 OD x 14 mm L
Noise Level
- =57 ± 2 dBA
- =60 ± 2 dBA
- 50 dBA
- 56 dBA
Number of Door
- 1
- 2
Number of Shelves
- 1 (Fixed)
- 2
- 3
- 4
Number of Sieves
- 8" dia - 6 Sieves with FH Pan/13 Sieves with HH Pan, 12" dia - 4 Sieves with FH Pan/6 Sieves with HH Pan or 8" Sieves with HH Pan
- 19
- 24
Number of Wells
- 1
- 2
- 4
- 5
- 6
- 8
- 9
- 12
- 14
- 15
- 16
- 20
- 21
- 24
- 30
- 64
- 80
- 96
Operating Environment
- 0 to 149°F/-18 to 65°C, 0 to 90% Humidity, Non-condensing
- 30 to 130°F/0 to 55°C, 0 to 90% Humidity, Non-condensing
- 30 to 130°F/0 to 55°C, 0 to 90% RH, Non-condensing
- 125°F
Operating Temperature
- 5 to 40°C Less Than 85% RH
- 10 to 40°C
Operator Interface
- Advance, Infinity, Up-down Keys, Thermocouple Receptacle, 3-wire Load Receptacle
- Control Knob, 3-wire Load Receptacle
- Control Knob, Lighted On/Off Switch, 3-wire Load Receptacle
Orbit
- 0.1"
- 0.2"
- 0.8"
- 1"
- 2"
Output Power
- 7 w
- 40 w
- 50 w
- 150 w
Outside Diameter
- 1.5"
- 1.56"
- 1.69"
- 1.75"
- 2.19"
- 2.25"
- 2.31"
- 2.44"
- 2.63"
- 2.69"
- 2.75"
- 3"
- 3.14"
- 3.25"
- 3.5"
- 3.63"
- 3.86"
- 3.88"
- 4"
- 4.13"
- 4.19"
- 4.25"
- 4.31"
- 4.5"
- 4.69"
- 4.77"
- 4.88"
- 4.89"
- 5"
- 5.48"
- 5.63"
- 5.69"
- 5.75"
- 5.94"
- 6"
- 6.13"
- 6.25"
- 6.31"
- 6.5"
- 6.88"
- 7"
- 7.12"
- 7.13"
- 7.38"
- 7.5"
- 7.63"
- 7.75"
- 8"
- 8.13"
- 8.25"
- 8.5"
- 8.56"
- 8.7"
- 8.75"
- 9"
- 9.2"
- 9.25"
- 9.5"
- 9.81"
- 10"
- 10.38"
- 10.66"
- 11"
- 12.5"
- 12.63"
- 13"
- 14.53"
- 347"
Overall Length
- 110 mm
- 130 mm
- 171 mm
- 203 mm
- 219 mm
- 220 mm
- 240 mm
- 266 mm
Packaging Type
- Bottle
- Glass Bottle
- Metal Can
- Steel Drum
Pan Size
- 3.14 in x 3.14 in (80 mm x 80 mm)
- 3.5 in (90 mm)
- 3.5 in x 3.5 in (90 mm x 90 mm)
- 5 x 5"
- 5.1 in x 5.1 in (130 mm x 130 mm)
- 6.5 x 6.5"
- 7.9 in x 7 in (201 mm x 178 mm)
- 8 x 6"
- 11.8 x 11"
- 12.2 in x 14.8 in (311 mm x 377 mm)
- 25 mm dia
- 80 mm
- 80 mm dia
- 85 mm dia
- 90 mm
- 90 mm dia
Path Length
- -16 - +30
- 0.0625"
- 0.1 to 50 mm
- 0.125"
- 0.25"
- 0.5"
- 1 mm
- 2 mm
- 2"
- 2.5 mm
- 5"
- 6"
- 10 mm
- 15 mm
- 20 mm
- 25 mm
- 33 mm
- 40 mm
- 50 mm
- 100 mm
Pivot Ring
- Center Molded
- No
- Removable
- Yes
Platform Dimension
- 190 L x 242 mm W
- 210 L x 210 mm W
- 279 L x 279 mm W
- 300 x 380 mm
- 309 L x 375 mm W
- 390 x 530 mm
Plug Type
- Nema 6-15P
Power
- 115 V, 60 Hz
- AC 100 to 120 V (3 A) or AC 200 to 240 V (1.5 A), 50/60 Hz, Approximately 400 w
Power Consumption
- 280 w
- 560 w
Power Requirement
- 100 V, 60 Hz
- 110 V
- 115 V
- 115 V, 60 Hz
- 120 V, 60 Hz
- 230 V
- 230 V, 50 Hz
- 230 V, 60 Hz
Power Supply
- 9 V Alkaline Battery
- 100 to 230 V, 50/60 Hz
Precision
- ±1 %
- ±2 %
- ±3.5 %
- ±5 %
Print Width
- 1.89"
- 18 mm
Pump Speed
- 9 m3/h
- 10 m3/h
Pump Type
- RPM-Regulated
- Valve-Regulated
Range
- 0.02 to 1.1 mg/L
- 0.02 to 1.6 mg/L
- 0.02 to 2.5 mg/L
- 0.06 to 5 mg/L
- 0.5 to 25 mg/L
- 1 to 30 mg/L
- 1 to 50 mg/L
- 5 to 150 mg/L
Rating
- 1.4 A, 50/60 HZ
Reagent Form
- Tablet
Refrigerated
- No
- Yes
Relative Humidity
- 0.8
Repeatability
- 0.0001 g
- 0.0025 mg (for 1 g)
- 0.004 mg (for 1 g)/0.01 mg
- 0.01 g
- 0.01 mg
- 0.02 mg
- 0.03 mg (for 100 g)
- 0.1 g
- 0.1 mg
- 0.1 mg, 1 mg Certified
- 0.1 mg/0.02 mg
- 0.1 mg/0.03 mg
- 0.1 mg/0.2 mg
- 0.2 mg
- 1 mg
Reservoir Capacity
- 0.4 Gallons / 1.5 Liters
- 0.53 Gallons / 2.0 Liters
- 1.32 Gallons / 5.0 Liters
- 2.64 Gallons / 10.0 Liters
- 5.28 Gallons / 20.0 Liters
- 7 L
- 7.4 Gallons / 28.0 Liters
- 15 L
- 20 L
- 28 L
- 45 L
Resin Type
- Activated Carbon
- Cation Exchange
- Macroreticular, Activated Carbon
- Mixed-Bed
- Mixed-Bed Ion Exchange with Activated Carbon
- Mixed-Bed and Strong Cation Exchange, Activated Charcoal
- Oxygen Removal
- Pretreatment Macropure
- Strong Anion Exchange
- Strong Cation Exchange
- Two Bed Ion Exchange
- Two Bed Ion Exchange with Strong Cation Exchange
- Ultrapure Mixed-Bed Ion Exchange
Resistance
- 1.88 O/ft
- 3.77 O/ft
- 9.08 O/ft
- 18.15 O/ft
- 27.25 O/ft
Resolution
- 0.00002 lb
- 0.00005 lb
- 0.00005 lb/0.02 g
- 0.0001 lb
- 0.0001 lb/0.05 g
- 0.0002 lb
- 0.0002 lb/0.1 g
- 0.0005 lb
- 0.0005 lb/0.2 g
- 0.001 g
- 0.001 lb
- 0.001 lb/0.5 g
- 0.001 mg
- 0.001 mg/0.01 mg
- 0.002 lb
- 0.002 lb/1 g
- 0.005 lb/0.002 kg/0.1 oz
- 0.005 lb/2 g
- 0.01 g
- 0.01 g/0.02 g/0.05 g
- 0.01 lb/0.005 kg/0.2 oz
- 0.01 lb/5 g
- 0.01 mg
- 0.01 mg; 0.1 mg
- 0.01 mg;0.1 mg
- 0.02 lb/0.01 kg/0.5 oz
- 0.05 lb/0.02 kg/1 oz
- 0.1 g
- 0.1 g/0.2 g/0.5 g
- 0.1 lb/0.05 kg/2 oz
- 0.1 mg
- 0.1 mg/0.01 mg
- 0.2 g
- 0.5 g
- 1 g
- 1 g/2 g/5 g
- 1 mg
- 2 g
Rings
- 6
- 8
Rotation Direction
- Clockwise Only
- Clockwise and Counterclockwise
Rotational Speed
- 0.17 to 8.3 rpm
- 2 to 23 rpm
- 2 to 83 rpm
Rotor Diameter
- 80 mm
- 100 mm
- 140 mm
Sample Type
- (12) 12.5 mm Cuvettes
- 0.5 ml Micro Taper Tube
- 0.5 ml, 1.5 ml, 2 ml
- 0.92 mm Test Tube
- 0.93 mm Test Tube
- 0.94 mm Test Tube
- 1.5 ml Eppendorf™ Tube
- 1.5 ml Tube
- 2 ml Corning™ Tube
- 2 ml Eppendorf™ Tube
- 6 mm Test Tube
- 10 mm Test Tube
- 10 x 8 Tube Strips, 0.2 ml Micro
- 12 mm Vial
- 15 ml Test Tube
- 15 mm Vial
- 16 mm Vial
- 17 mm Vial
- 19 mm Vial
- 20 mm Test Tube
- 21 mm Vial
- 23 mm Vial
- 25 mm Test Tube
- 25 mm Vial
- 25 mm, 0.92 mm, 6 mm
- 28 mm Vial
- 35 mm Test Tube
- 50 ml Test Tube
- 50, 15, 1.5 ml
- 96-Well PCR Plate, 0.2 ml Micro
- Individual Tubes, 0.2 ml Micro
- Titer
Scale
- 5 K
Series
- M
- O Series
- PFXi-195/8
- PFXi-195/7
- PFXi-195/5
- PFXi-195/4
- PFXi-195/3
- PFXi-195/2
- PFXi-195/1
- STM
- TM
Shaft Diameter
- 0.25"
- 0.31"
- 0.5"
- 6 mm
- 8 mm
- 9.5 mm
- 10 mm
- 12.5 mm
Shaft Length
- 8.75"
- 9"
- 12"
- 15"
- 18"
- 190 mm
- 400 mm
- 500 mm
- 550 mm
- 650 mm
- 914 mm
Shape
- Cell (Cuvette)
- Circulus™
- Cylindrical
- Egg
- Elliptical
- Fluted Octagon
- Gaint Polygon
- Hexagonal Handle
- Micro (Flea)
- Octagon
- Octagonal
- Polygon
- Rectangular
- Round
- Round Bottom
- Spear
- Spherical, Hemispherical
- Spinfin®
- Spinplus®
- Spinring®
- Spinstar®
- Spinvane® Triangular
- Spinwedge®
- Square
- Triangular
Size
- 1 Block
- 1 kg
- 2 Block
- 3 Block
- 9 to 13 mm
- 10 to 17 mm
- 14 to 19 mm
- 15 to 17 mm
- 20 to 25 mm
- 32 mm
- 57 mm
- 76 mm
- Extra Large
- Large
- Macro
- Medium
- Semi-micro
- Small
- Standard
- XL
Speed
- 0 to 333 rpm (Low Speed Shaft), 0 to 4000 rpm (High Speed Shaft)
- 333/4000 rpm
- 2
- 12 to 1800 rpm
- 20 to 3000 rpm
- 40 to 2002 rpm
- 40 to 2010 rpm
- 40 to 6000 rpm
- 50 to 2500 rpm
- 57 rpm
- 100 to 11500 rpm
- 125 rpm
- 170 rpm
- 208 rpm
- 266 rpm
- 350 rpm
- 417 rpm
- 660 rpm
- 850 rpm
- 1000 rpm
- 1200 rpm
- 2000 rpm
- 2500 rpm
- 3000 rpm
- 4000 rpm
- 6000 rpm
- 7000 rpm
- 10000 rpm
- 18500 rpm
- Single
- Two
Speed - High Range
- 360 to 1800 rpm
- 600 to 3000 rpm
- 1200 to 6000 rpm
Speed - Low Range
- 12 to 360 rpm
- 20 to 600 rpm
- 40 to 1200 rpm
Speed Display
- Yes
Speed Range
- 15 to 300 rpm
- 15 to 500 rpm
- 20 to 500 rpm
- 25 to 500 rpm
Stabilization Time
- 1 sec
- 1 sec (Fast Mode)
- 1.5 sec
- 2 sec
- 3 sec
- 5 sec
Standard Taper Joint
- 24/40
- 24/40, 29/42
- 29/42
- 34/45
- 19/22
- 45/50
- 24/25
- 35/20
- 14.5
- 24
Style
- Curved
- Double Cutting Edge
- Fine Point Curved Tip
- Freestanding FlaskScrubber Vantage Glassware Washer with Window
- Freestanding Washer
- Freestanding Washer with Window
- One End Tapered to a Point and One End Curved with Rounded Tip
- Sharp/Blunt
- Sharp/Sharp
- Short Delicate with Spring Handle
- Single Cutting Edge
- Straight
- Undercounter Washer
- Undercounter Washer with Window
Temperature Limit
- 45°F
- 480°F
Temperature Range
- +5 to 75°C
- +5 to 105°C
- -10°C to 40°C
- -20 to 135°C
- -20 to 170°C
- -20 to 200°C
- -25 to 135°C
- -30 to 135°C
- -30 to 170°C
- -30 to 200°C
- -40 to 200°C
- 5 to 400°C
- 5 to 550°C
- 5°C - 500°C
- 10 to 220°C Ambient
- 22 to 38°C
- 25 to 480°C
- 38 to 371°C
- 50 to 250°C
- 50 to 330°C
- 50°C - 380°C
- 60 to 360°C
- 70°C - 500°C
- 80 to 380°C
- 100 to 215°C
- 122 to 662°F
- 150 to 538°C
- 300°C
- 400 to 540°C
- 400°C
- 450°C
- 500°C
- 540°C
- Ambient +5 - 380°C
- Ambient +5 - 500°C
- Ambient 5 to 60°C
- Ambient 5 to 99°C
- Ambient 5 to 100°C
- Ambient 5 to 100°C or Boiling Mode
- Ambient 10 to 135°C
- Ambient to 90°C
- Ambient to 100°C
Temperature Stability
- ±0.1° C
Test Method
- Acid Digestion, Ascorbic Acid
- Chromotropic Acid
- Persulfate Digestion
- Persulfate Digestion, Ascorbic Acid
- Phosphomolybdenum/Ascorbic Acid
- Salicylate
Test Name
- Chlorine HR T
- Chlorine LR T
- Chlorine MR T
- Sodium Hypochlorite T
- pH Value T
Thermal Fluid Volume
- 4-8L
- 7-14L
Thermocouple Type
- Type J
Thickness
- 12 mm
Through Shaft
- No
- Yes
Timer
- 1 sec to 160 hr
- 1 to 120 min
- Countdown 1 to 2000 min (33.3 hr)
- No
Top Diameter
- 2.5"
- 2.75"
- 3"
- 3.5"
- 4"
- 4.25"
- 5"
- 5.63"
- 6"
- 6.75"
- 8"
- 8.38"
- 10.63"
- 12"
Top Plate Dimension
- 4 in x 4 in (102 mm x 102 mm) (LxW)
- 5.3 in (135 mm)
- 7 in x 7 in (178 mm x 178 mm) (LxW)
Top Standard Taper Joint
- 24/40 Outer
Torque
- 3/6/.26 lb/in.
- 0.66" lb
- 1.05" lb
- 1.5 lb/in.
- 2.43" lb
- 3.1 lb/in.
- 4" lb
- 4.6" lb
- 5.4 lb/in.
- 6 lb/in.
- 6" lb
- 6.6" lb
- 7.35" lb
- 12 lb/in.
- 14.5" lb
- 18" lb
- 21 lb/in.
- 26" lb
- 28" lb
- 46 lb/in.
- 56" lb
- 96 lb/in.
- 100" lb
- 170 Ncm
- 341 Ncm
- 568 Ncm
- 2500 lb/in.
- High
- Light
Torque Accuracy
- ± 12 Ncm (± 1 in-lb) or ± 5% of reading
Torque Display
- No
- Yes
Torque Maximum
- 10 Ncm
- 70 ncm
- 90 Ncm
- 170 Ncm
- 341 Ncm
- 568 Ncm
Torque Maximum - High Speed
- 34 Ncm (3 in-lbs = 48 in-oz)
- 68 Ncm (6 in-lbs = 96 in-oz)
- 114 Ncm (10 in-lbs = 160 in-oz)
Torque Maximum - Low Speed
- 10 Ncm (0.9 in-lbs = 14 in-oz)
- 70 Ncm (6 in-lbs = 100 in-oz)
- 90 Ncm (7.9 in-lbs = 127 in-oz)
- 170 Ncm (15 in-lbs = 240 in-oz)
- 341 Ncm (30 in-lbs = 480 in-oz)
- 568 Ncm (50 in-lbs = 800 in-oz)
Tube Capacity
- 1.5 ml
- 1.6 to 7 ml
- 4 to 10 ml
- 4.5 ml
- 5 to 7 ml
- 5 to 7ml
- 10 ml
- 15 ml
- 25 ml
- 30 ml
- 50 ml
- 85 ml
- 100 ml
- 250 ml
Tube Diameter
- 11 mm
- 12 mm
- 13 mm
- 16 mm
- 17 mm
- 24.5 mm
- 25 mm
- 29 mm
- 34 mm
- 38 mm
- 40 mm
- 41 mm
- 46 mm
- 62 mm
Tube Type
- Conical Bottom
- Flat Bottom
- Micro Tube
- Round Bottom
- Sarstedt
- Skirted Conical Bottom
- Vacutainer
- Vacutainer/Sarstedt
Type
- Activated Carbon
- Adjustable
- Advanced Protocol
- Advanced Protocol Security
- Ammonia HR
- Ammonia LR
- Analog, Gravity Convection
- Anion Removal
- Blade
- Cabinet
- Cartridge
- Cartridge Kit
- Cation Exchange
- Cation Removal
- Concentric Ring
- Concentric Ring Cover
- Cork Plug
- Dedicated
- Digital, Gravity Convection
- Digital, OTC
- Dimpled
- Double Tier
- Eccentric Disc
- Flange Bearing
- Flask Holder
- Flat
- Flex-grip Chuck
- Flexible
- General Protocol
- Grease-free
- Hammer
- Hardened
- Heavy Duty
- High Capacity
- Large Capacity Advanced Security Protocol
- Large Capacity General Protocol
- Mixed-Bed and Strong Cation Exchange, Activated Charcoal
- Multisegment, Single Program
- Nitrate
- One Piece
- Organic Removal
- Oxygen Removal
- Phosphate
- Potter-Elvehjem
- Pretreatment
- Pretreatment Macropure
- Quick Change Chuck
- Reverse Osmosis Membrane Cartridge
- Rotating Guard
- Shaker Platform Utility Tray
- Sieve Cover
- Single Setpoint
- Stacking
- Stacking Two Platforms
- Standard Hardened
- Straight, Potter-Elvehjem
- Tapered
- Timing Belt
- Total Nitrogen HR
- Total Nitrogen LR
- Two Bed Ion Exchange
- Two Bed Ion Exchange with Strong Cation Exchange
- Ultrapure
- Ultrapure Mixed-Bed Ion Exchange
- Ultrapure Polisher Cartridge
- Universal
- Utility Tray
- Variable Speed Motor Drive
Ultimate Elongation
- 3.75
- 4.15
- 4.25
- 5
- 300%
- 310%
- 350%
- 375%
- 450%
- 770%
Ultimate Vacuum
- 2 mbar
- 5 mbar
- 5 x 10-3 mbar / 3.8 x 10-3 torr
- 7 mbar
- 12 mbar
Ultimate Vacuum Range
- Down to 0.3 mbar
- Down to 0.6 mbar
- Down to 1.5 mbar
- Down to 7 mbar
- Down to 70 mbar
Ultimate Vacuum Torr
- 1.1 Torr
- 1.5 Torr
- 4.5 x 10-1 Torr
- 5 Torr
- 9 Torr
- 52 Torr
- 75 Torr
Ultimate Vacuum mbar
- 1.5 mbar
- 2 mbar
- 6 mbar
- 6 x 10-1 mbar
- 7 mbar
- 8 mbar
- 12 mbar
- 15 mbar
- 20 mbar
- 70 mbar
- 90 mbar
- 100 mbar
- 130 mbar
- 160 mbar
Uniformity
- ±1 at 37°C
- ± 0.2°C at 37°
- ± 0.3°C at 37°
- ± 0.5°C at 37°
- ± 0.6°C at 37°
- ± 0.6°C/± 0.2°C (Fan 0%/Fan 100%) at 37°
- ± 0.6°C/± 0.3°C (Fan 0%/Fan 100%) at 37°
- ± 0.6°C/± 0.4°C (Fan 0%/Fan 100%) at 37°
- ± 1.3°C at 37°
Viscosity Maximum
- 15000 cP
- 20000 cP
- 50000 cP
- 90000 cP
- Wate like
Voltage
- 100/240 V
- 208/240 V
- 30 V
- 60 V
- 100 V
- 100 to 120 V
- 100 to 120, 200 to 230 V
- 100 to 240 V
- 100-115 V/200-230 V, 120 V
- 100-240 V
- 110 V
- 115 V
- 115 V/230 V
- 120
- 120 V
- 120 V/230 V
- 230 V
- 230 V; 50/60 Hz
- 240 V
- CE 230 V
- CE 240 V
Volume
- 0.09 cu ft
- 0.20 cu ft
- 0.31 cu ft
Volume Maximum
- 2 L
- 25 L
- 60 L
- 80 L
Volumetric Flow (ml/min)
- 0.005-277
- 0.005-329
- 0.005-364
- 0.36-813
- 0.5-936
- 0.85-861
- 2.0-4056
- 4.0-4151
Wall Thickness
- 0.030"
- 0.031"
- 0.03125"
- 0.046875"
- 0.062"
- 0.0625"
- 0.093"
- 0.09375"
- 0.125"
- 0.1875"
- 0.25"
- 0.8 mm
- 1 mm
- 1.5 mm
- 1.6 mm
- 2 mm
- 2.4 mm
- 3.2 mm
- 4 mm
- 4.0 mm
- 4.8 mm
- 6.4 mm
- 7.9 mm
- 9.5 mm
- 12.7 mm
Warranty
- 2 Years (Parts and Labor)
- 3 years
Water Inlet
- 0.37" NPT (0.5" Drain, 0.13" NPT Vacuum)
- 0.37" NPT Tapered
- 0.37" Threaded Coupling
Wattage
- 2 to 650 w
- 2 to 650 w (Lower Half), 590 w (Upper Half)
- 2 to 700
- 2 to 700 w
- 2 to 770 w
- 2 to 1000 w
- 3 at 1000 w
- 12 w
- 15 w
- 20 w
- 25 w
- 27 w
- 30 w
- 35 w
- 40 w
- 50 w
- 60 w
- 60 w (Lower Half)
- 70 w
- 80 w
- 80 w (Lower Half)
- 85 w (Per Position)
- 90 w
- 95 w
- 100 w
- 100 w (Lower Half)
- 110 w
- 120 w
- 125 w (Per Position)
- 135 w
- 140 w
- 140 w (Per Position)
- 150 w
- 170 w
- 180 w
- 180 w (Lower Half)
- 180 w (Per Position)
- 190 w
- 200 w
- 210 w
- 210 w (Per Position)
- 220 w
- 225 w
- 230 w
- 240 w
- 250 w
- 260 w
- 260 w (Lower Half), 260 w (Upper Half)
- 270 w
- 270 w (Lower Half)
- 280 w
- 290 w
- 300 w
- 325 w
- 330 w (Lower Half), 330 w (Upper Half)
- 335 w
- 350 w
- 375 w
- 380 w
- 380 w (Lower Half), 140 w (Upper Half)
- 390 w (Lower Half), 390 w (Upper Half)
- 400 w
- 430 w
- 450 w
- 470 w
- 500 w
- 500 w (Lower Half), 200 w (Upper Half)
- 550 w
- 600 w
- 600 w (Lower Half), 300 w (Upper Half)
- 630 w
- 650 w
- 700 w
- 710 w
- 750 w
- 870 w
- 970 w
- 1000 w
Weight
- 0.3 g
- 0.4 lb
- 0.5 kg
- 0.5 lb
- 0.6 lb
- 0.7 lb
- 0.8 lb
- 0.9 lb
- 1 g
- 1 lb
- 1.1 kg
- 1.2 g
- 1.2 lb
- 1.3 g
- 1.3 kg
- 1.3 lb
- 1.5 kg (Impeller), 0.5 kg (Sweep)
- 1.5 lb
- 1.6 kg
- 1.6 lb
- 1.7 g
- 1.7 lb
- 1.8 lb
- 2 g
- 2.0 g
- 2 lb
- 2.2 lb
- 2.3 lb
- 2.4 lb
- 2.5 g
- 2.5 lb
- 2.6 lb
- 2.8 lb
- 2.9 lb
- 3 lb
- 3.3 g
- 3.4 lb
- 3.6 lb
- 3.7 g
- 3.7 lb
- 3.8 g
- 3.9 lb
- 4 lb
- 4.4 g
- 4.4 lb
- 4.5 lb
- 4.7 lb
- 4.8 lb
- 4.9 lb
- 5 lb
- 5.1 lb
- 5.2 g
- 5.2 lb
- 5.4 lb
- 5.5 lb
- 5.7 lb
- 5.8 lb
- 5.9 lb
- 6 lb
- 6.2 lb
- 6.5 lb
- 6.8 lb
- 7 g
- 7 lb
- 7.2 lb
- 7.7 lb
- 7.9 lb
- 8 lb
- 8.5 lb
- 9 lb
- 9.4 g
- 9.5 g
- 10 lb
- 10.8 lb
- 11 lb
- 11.8 lb
- 11lb
- 12 lb
- 12.9 g
- 13 g
- 13 lb
- 14 g
- 14 lb
- 15 lb
- 15.9 g
- 16 lb
- 16.2 g
- 17 lb
- 18.8 lb
- 18.9 lb
- 19 lb
- 20 lb
- 21 lb
- 22 lb
- 23 g
- 24.6 lb
- 25 kg
- 29.7 g
- 34 lb
- 38.4 g
- 40 g
- 40 g/m2
- 41 lb
- 43 g/m2
- 46 g
- 55 lb
- 80 g/m2
- 80 lb
- 91 g
- 113 g
- 114 lb
- 116 lb
- 120 g
- 120 lb
- 126 g
- 127 g
- 128 g
- 159 g
- 160 g
- 168 g
- 180 g
- 180 lb
- 181 g
- 200 g
- 280 g
- 300 g
- 720 g
Wheel Color
- Blue
- Green
- Red
Width
- 0.25"
- 0.5"
- 0.625
- 1"
- 3"
- 3.8"
- 4.25"
- 4.8"
- 5"
- 5.12"
- 5.8"
- 5.9"
- 6"
- 6.34"
- 6.4 in
- 6.6"
- 6.625"
- 6.63"
- 7"
- 7.25"
- 7.6 cm
- 7.8"
- 8"
- 8.2"
- 8.3"
- 8.5"
- 8.7"
- 8.8 in
- 9.125"
- 9.5 cm
- 9.5"
- 9.6"
- 10"
- 10.1 cm Interior, 27.9 cm Exterior
- 10.3 cm Interior, 23 cm Exterior
- 10.4 cm
- 11"
- 11.3"
- 11.6 in
- 11.6"
- 12.5 mm Exterior, 10 mm Interior
- 12.7 cm Interior, 25 cm Exterior
- 13"
- 13.25"
- 13.9"
- 14"
- 14.5"
- 14.6"
- 14.9 cm
- 15"
- 15.1"
- 16.2"
- 16.5 cm
- 16.5"
- 17 mm
- 18"
- 18.5"
- 19.1 cm
- 19.2"
- 19.3"
- 19.5"
- 20.2"
- 21 mm
- 21.1"
- 21.6 cm
- 21.8 cm
- 22"
- 22.2 cm
- 22.4"
- 22.5 cm
- 23.1"
- 25 cm
- 25.4 cm
- 26.7"
- 26.9 cm
- 27.9 cm
- 28"
- 28.7 cm
- 29"
- 30"
- 30.5 cm
- 31.8 cm
- 33 cm
- 33 cm Interior, 48.5 cm Exterior
- 34.1 cm
- 35 cm
- 35"
- 36 cm Interior, 54.6 cm Exterior
- 36"
- 39.4 cm
- 41.9 cm
- 45.7 cm
- 45.9 cm
- 51 mm
- 55 mm Exterior, 51 mm Interior
- 55.2 cm
- 56 cm
- 57.5 mm W
- 60"
- 61 cm
- 61.7 cm
- 76 mm
- 82 mm
- 84 mm
- 165 mm
- 305 mm
- 362 mm
- 365 mm
- 402 mm
- 407 mm
- 408 mm
- 446 mm
- 723 mm
With
- (2) 21.8 cm Bars, Non-skid Rubber Surface and Mounting Hardware
- (4) 45.7 cm Bars, Non-skid Rubber Surface and Mounting Hardware
- (4) 61 cm Bars, Non-skid Rubber Surface and Mounting Hardware
- (5) 61 cm Bars, Non-skid Rubber Surface and Mounting Hardware
- Arbor
- Attached Crescent-shaped Swivel Blade
- Blade
- Clamps and Mounting Hardware
- Hose Barb
- Integrally Cast Side Arm, Plated Brass Nozzle, Cast Aluminum Baffle Tube
- Mounting Hardware
- Mounting Hardware and Rubber Mat
- Non-skid Rubber Surface and Mounting Hardware
- Pre-mounted PVC Clamp for 125 ml Flasks and Mounting Hardware
- Pre-mounted PVC Clamp for 250 ml Flasks and Mounting Hardware
- Pre-mounted PVC Clamp for 500 ml Flasks and Mounting Hardware
- Pre-mounted PVC Clamp for 1000 ml Flasks and Mounting Hardware
- Serrated Tail and Side Arm
- Socket, 316 Stainless Steel Kel-F Tip Set Screws and L-key
- Spring and Mounting Hardware
- Tray, Adjustment Screws, Mounting Hardware
Withstand Temperature
- 150°C
- 1150°C
Zero Torque
- No
- Yes
Equipment & Instruments
1186 results
-
-
-
Glas-Col Variable Speed Homogenizer Motor Drive
Variable Speed Homogenizer Motor Drive, 3.38 H x 8 W x 6" D, Foxtip Gray, Charcoal, 5.5 H x 4.38 W x 4.38" D Motor, 0 to 333/4000 RPM Speed, 120 V, 2.5 A, 50/60 Hz Electrical Requirement, 25°C Ambient Temperature
-
-
-
-
DWK Life Sciences (Kimble) Slow-Dry® Concentra...
Concentrator Tube, 10 ml, 113 mm H, Borosilicate Glass, 19/22 Standard Taper Joint, Reduces the Risk of Concentrating a Sample to Dryness
-
-
-
-
Caframo Cast Pitched Blade Impeller
Impeller, 25 mm dia Blade, 400 L x 8 mm dia, Electropolished 316L Stainless Steel Blade, Passivated 316L Stainless Steel Shaft, Axial Flow Pattern, Left Hand Blade Rotation, Cast Pitched Blade Type, For Overhead Stirrers
-
-
-
-
- Manufacturers: Ohaus®
- Brand: Ohaus®
- SECO Part No: OHS-30400225
-
Availability:
- Minimum order quantity: 1
- Qty. Interval: 1
Ohaus®
Cover, For Universal Holder, Replacement for More...
-
Login to View Your Price
List Price :
-
Add to cart
-
-
-
-
Orion™ Vial Adapter
Vial Adapter, 13 mm L, For Use With AQUAfast® AQ4000 Colorimeter
-
-
-
-
- Manufacturers: Thermo Fisher Scientific
- Brand: Barnstead™
- SECO Part No: TFS-50138221
- Sold As: Each
- Manufacturer Part No: 50138221
-
Availability:
- Minimum order quantity: 1
- Qty. Interval: 1
Barnstead™ 50138221
More...
-
Login to View Your Price
List Price :
-
Add to cart
-
-
-
-
Globe Scientific ABS Plastic Slide Draining Tray
Slide Draining Tray, 230 x 78 x 25 mm, Blue, ABS Plastic, Removable Type, 100 Pre-numbered Slots, Accommodate Upto 200 Slides, Provides Space Between Each Slide For Easy Identification, For 513250 Series Slide Storage Box
-
-
-
-
- Manufacturers: Ohaus®
- Brand: Pioneer™
- SECO Part No: OHS-30429851
- Manufacturer Part No: 30429851
-
Availability:
- Minimum order quantity: 1
- Qty. Interval: 1
Pioneer™ 30429851
Precision Balance PX3202/E,User-selectable en More...
-
Login to View Your Price
List Price :
-
Add to cart
-
-
-
-
Heratherm™ Advanced Protocol Oven
Model OGH180 Gravity Convection Oven, 168 L, 29.1 L x 25.2 W x 36.2" H Exterior, 26.8 H x 17.2 W x 22.2" D Interior, Coated Steel, 50 to 330°C Temperature Range, 208/240V, 60 Hz, 3360 W, 14 A, Low Overall Energy Consumption, Built in Timer, Programmable Microprocessor control with vacuum fluorescent display.
-
-
-
-
- Manufacturers: BrandTech Scientific
- Brand: VACUUBRAND®
- SECO Part No: 21-4421-01
- Sold As: Each
- Manufacturer Part No: 20696623
-
Availability:
- Minimum order quantity: 1
- Qty. Interval: 1
VACUUBRAND® 20696623
Oil-Free Chemistry Diaphragm Vacuum Pump, MD More...
-
Login to View Your Price
List Price :
-
Add to cart
-
-
-
-
- Manufacturers: Heidolph® Instruments
- Brand: Heidolph North America
- SECO Part No: HDH-023210671
- Sold As: 1/Pack
- Manufacturer Part No: 023210671
-
Availability:
- Minimum order quantity: 1
- Qty. Interval: 1
Heidolph North America 023210671
The 2840EL Laboratory Model sterilizer has a More...
-
Login to View Your Price
List Price :
-
Add to cart
-
-
-
-
- Manufacturers: Heidolph® Instruments
- Brand: Heidolph® Instruments
- SECO Part No: HDL-036041036
- Manufacturer Part No: 036041036
-
Availability:
- Minimum order quantity: 1
- Qty. Interval: 1
Heidolph® Instruments 036041036
Precise setting of rotation speed and heating More...
-
Login to View Your Price
List Price :
-
Add to cart
-
Showing 1 - 12 of 1186 entries
*