Tygon® F-4040-A Fuel and Lubricant Tubing, 0.25 ID x 0.375" OD, 50' L
Tubing, 50' L, 0.25 ID x 0.375" OD, Translucent Yellow, Tygon, 0.0625" Thickness, 1" Minimum Blend Radius, 30 psi Maximum Working Pressure, F-4040-A Series, Ozone and UV Light Resistant
- Manufacturer Part No: AAG00017
- SECO Part No: 13-9109-14
- Sold As:
-
Availability:
Login to View Your Price
-
List Price :
Specifically designed to handle most fuels and industrial lubricants, Tygon® Fuel and Lubricant Tubing resists the swelling and hardening caused by hydrocarbon-based fluids. This significantly reduces the risk of failure due to cracking and leakage. Its minimum extractability safeguards the liquid or vapor being transferred against adulteration. Because it's extremely flexible, Tygon® Fuel and Lubricant Tubing simplifies installation, even in tight places. It is translucent yellow for positive identification and to allow easy flow monitoring. It is routinely used to handle gasoline, kerosene, heating oils, cutting compounds and glycol-based coolants.
| Material | : | Tygon |
| Length | : | 50' |
| Series | : | F-4040-A |
| Color | : | Translucent Yellow |
| Diameter | : | 0.25 ID x 0.375" OD |
| Wall Thickness | : | 0.0625" |
| Minimum Blend Radius | : | 1" |
| Maximum Working Pressure | : | 30 psi at 73°F |
| Vacuum Rating | : | 29.9" at 73°F |
| Durometer Hardness | : | 57 (Shore A), 15 sec |
| Tensile Strength | : | 1,820 psi |
| Ultimate Elongation | : | 310% |
| Specific Gravity | : | 1.26 |
| Maximum Operating Temperature | : | 165°F |
| Tensile Stress | : | 910 psi at 100% Elongation |
| Tensile Set | : | 50% |
| Packaging Type | : | Manufactured Sizes and Pressures |
- Resists embrittlement
- Compatible with most hydrocarbons
- Resistant to swelling
- Highly flexible, easy to install
- Specifically developed for fuels and lubricants
- Ozone and UV light resistant
- Small engine fuel lines
- General automotive
- Recreational vehicles
- Lawn and garden equipment
- Coolant transfer
- Heating fuels
- Cutting compounds
- Polishing equipment
- Lubrication lines
- ASTM D1599 Approved