Magna™ Plain Nylon Membrane Filter, 47 mm dia, 0.45 µm Pore

Membrane Filter, 47 mm, 0.45 µm Pore Size, Nylon, Plain, Disk Format, 65 to 125 µm Thickness, 120 µg/cm2 BSA Protein Binding, 18.94 to 36.15 ml/min/cm2 @ 10 psi Flow Rate, Sterile, Hydrophilic

  • Manufacturer Part No: 1213776
  • SECO Part No: 12-4475-14
  • Sold As:
  • Availability: loading

Nylon filtration membrane is a supported, naturally hydrophilic membrane designed to wet out evenly and retain its superior strength during use in general filtration or medical assays. Nylon filtration membrane is internally supported with an inert polyester support web giving it added dimensional strength and stability that prevents cracking, tearing, curling and breaking. This added strength and durability is advantageous during usage that involves aggressive handling or automated equipment. A naturally hydrophilic membrane, it does not require wetting agents that can interfere with biological processes. This membrane has porosity of 70/80% for high diffusion and low-flow resistance.

Material : Nylon
Diameter : 47 mm
Hydrophilic : Yes
Format : Disc
Pore Size : 0.45 µm
BSA Protein Binding : Approximately 120 µg/cm2
Bubble Point : 30 to 45 psi
Extractables : <0.2%
Flow Rate : 18.94 to 36.15 ml/min/cm2 at 10 psi
Flow Time : 44 to 84 sec
Grade : Plain
Hydrophobic : No
Operating Temperature : Up to 180°C
Porosity (Void Volume) : 70 / 80%
Sealing Compatibility : Ultrasonics, Heat, Radio Frequency and Insert Molding
Sterility : Sterile
Sterilization Method : Steam, Gamma IR Radiation or Ethylene Oxide
Thickness : 65 to 125 µm
  • Hydrophilic- eliminates the need for wetting agents that can potentially interfere with biological processes
  • Super strength: Eases handling when used with automated equipment
  • Low extractables- ensures tests will be clean and pure leading to more consistent results
  • Lot-to-lot consistency- quality checks ensure lot-to-lot consistency, both down and across the polyester web, for dependable results every time

Recently Viewed