0 Items

Scientific Equipment Company

Cart 0 Items
OLEUM Z600-OL
Share
  1. pin-int
Email Print

OLEUM Oil-Testing Centrifuge, 230 V

Oil-Testing Centrifuge, 230 V, 200 to 3000 rpm Speed Range, Stainless Steel Chamber, Programmable, For Use with 4 x 100 ml Swing Out Rotor (sold separately)

  • Manufacturer Part No: Z600-OL
  • SECO Part No: BEN-Z600-OL
  • Sold As:
  • Availability: loading

The OLEUM Oil-Testing Centrifuge is a stand alone oil testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000 rpm or 2,213 xg to determine the water content of your oil sample. This purpose made unit has a normal air cooling without a heating or refrigeration system.

Capacity : 4 x 100 ml
Height : 16"
Width : 22"
Length : 25"
Maximum RCF : 2213 xg
Maximum Speed : 3000 rpm
Refrigerated : No
Display : LCD
Electrical Requirement : 230 V; 50/60 Hz
Controller Type : Microprocessor
Program Storage : up to 99 runs
Run Time : 99 hrs 59 min in 1 min/10 sec increments
Noise Level : <55 dBA, at max speed
Accel/Decel Profiles : 10 Adjustable
Lid Lock Type : Motor Driven Lid Lock
Maximum Relative Centrifuge Force (xg) : 2213
Net Weight : 159 lbs
Power Consumption : 950 W
Program Memory : Yes
Rotor Maximum Capacity : 4 x 100 ml
Running Time : 99 hrs 59 min in 1 min/10 sec increments
Speed Range : 200 to 3000 rpm
Voltage : 230 V; 50/60 Hz
  • ASTM compliant for petroleum testing
  • Swing out rotor for pear shaped or conical ASTM tubes
  • Stainless steel chamber
  • Over-speed protection
  • Increments of 10 rpm/50 rcf
  • Imbalance detection
  • Program Storage (up to 99)
  • Audible end of run alarm
  • Maintenance free induction drive
  • Quiet operation, less than 55 DB
  • Electrical Safety lid-lock
  • Selection of speed in both rpm and g-force, in increments of 10
  • 10 acceleration and deceleration rates, possibility of unbraked deceleration
  • Pre-selection of the running time, from 10 sec to 99 hrs 59 min or continuous
  • Splash proof LCD display and foil keyboard
  • Simple one-handed operation, easy to program with gloves on
  • Permanent indication of pre-set and actual values
  • Quick-key for short runs
  • Thermal cut-out

Recently Viewed