0 Items

Scientific Equipment Company

Cart 0 Items
Orion™ Versa Star™ VSTAR-CND
Share
  1. pin-int
Email Print

Orion™ Versa Star™ Conductivity/TDS/Resistivity/Salinity/Temperature Module

Conductivity/TDS/Resistivity/Salinity/Temperature Module, 12 L x 3 W x 9.5 cm H, 22 to 221°F Temperature Range, 0.001 to 199.9 Cell Constant, Conductivity Sensor Probe Type, 8 pin MiniDIN Input

  • Manufacturer Part No: VSTAR-CND
  • SECO Part No: 21-0730-02
  • Sold As:
  • Availability: loading

Add conductivity, total dissolved solids (TDS), salinity, resistivity and temperature measurement capabilities to your Thermo Scientific™ Orion™ Versa Star meter using the Thermo Scientific™ Orion™ Versa Star Conductivity Measurement Module. Each Orion™ Versa Star meter has four channels that can be customized with interchangeable measurement modules. The Versa Star conductivity module offers reliable, fast results with auto-ranging conductivity values and linear, non-linear pure water or EP temperature compensation with 5, 10, 15, 20 or 25°C reference temperatures. Select from five Thermo Scientific Orion Versa Star measurement modules to customize the measurement capabilities of your Orion Versa Star meter. Measurement modules are interchangeable and can be added or removed from each Versa Star meter's four channels at any time.

Length : 12 cm
Width : 3 cm
Height : 9.5 cm
Model : Conductivity/TDS/Salinity/Resistivity/Temperature Measurement Module
Accuracy (Conductivity) : 0.5% of Reading ±1 Digit >3 ¿s, 0.5% of Reading ±0.01 µS =3 µS
Accuracy (Resistivity) : 0.5% of Reading ±1 Digit
Accuracy (Salinity) : ±0.1 ppt
Accuracy (TDS) : 0.5% of Reading ±1 Digit
Alarm Output : Set Point Alarm, High/Low Limit Alarm, Calibration Due Alarm
Cell Constant : 0.001 to 199.9
Compatible Probes : 2-cell or 4-cell Conductivity Sensors with Built-in Temperature
Includes : Versa Star Conductivity Module and Printed Quick Start Guide
Input : 8 pin MiniDIN (Conductivity Sensor with Built-in Temperature)
IP Rating : IP54
Measurement Mode : Conductivity, TDS, Salinity or Resistivity with Temperature
Method : 10 per Channel with Password Protection
Operating Temperature : 41 to 113°F
Probe Type : Conductivity Sensor
Range (Conductivity) : 0.001 µS/cm to 3000 mS/cm
Range (Resistivity) : 2 ohm to 100 meg-ohm
Range (Salinity) : 0.06 to 80 psu, 0.05 to 42 ppt
Range (TDS) : 0 to 200 ppt
Relative Humidity Range : 5 to 85%, Non-condensing
Resolution (Conductivity) : 0.001 µS Minimum, Auto Ranging up to 4 Significant Digits
Resolution (Resistivity) : 1 ohm or 0.1 meg-ohm, Auto Ranging
Resolution (Salinity) : 0.01 psu or 0.01 ppt Minimum, Auto Ranging
Resolution (TDS) : 0.001 ppm Minimum, Auto Ranging up to 4 Significant Digits
Stability : Selectable Fast, Medium, Slow or Smart Stability Setting, Selectable off or Automatic Smart Averaging Setting
TDS Factor Range : Linear (0.02 to 9.99)
Temperature Accuracy : ±0.1°C
Temperature Probe Calibration : 1 Point Temperature Offset Calibration
Temperature Range : 22 to 221°F
Temperature Resolution : 0.1°C
Temperature Selection : Manual or Automatic with ATC Temperature Probe
Weight : 0.2 kg
  • Orion versa star conductivity measurement module: Measure conductivity, TDS, salinity or resistivity with temperature
  • Perform up to a six point conductivity calibration with calibration editing option that allows individual points to be fixed without a full recalibration
  • Auto-ranging conductivity values offer consistent readings across entire measurement range without need to recalibrate
  • Use linear, non-linear, EP (USP) or off conductivity temperature compensation with 5, 10, 15, 20 or 25°C reference temperatures
  • Customize measurements to show calibration history or simplify to show an extra large conductivity reading
  • Module offers a 3-year replacement warranty
  • Linear, nLFn (non-linear ultra pure water), nLFu (non-linear ultra pure degassed water), EP (off with warning) or off temperature compensation
  • Conductivity with calibration editing option and temperature calibration

Recently Viewed