SECO Nylon Syringe Filter, 13 mm dia, 0.45 µm Pore Size
Syringe Filter, 10 ml, <20 µl Holdup Volume, <10 ml Sample Volume, 13 mm dia, 0.45 µm Pore Size, Nylon, Polypropylene Housing, 1.09 mm2 Filtration Area, 130°C Operating Temperature, 87 psi Maximum Pressure, Luer Lock Female, Luer Slip Male
- Manufacturer Part No: IWT-ES10008
- SECO Part No: IWT-IWT-ES10008
- Sold As:
-
Availability:
Login to View Your Price
-
List Price :
| Capacity | : | 10 ml |
| Membrane Diameter | : | 13 mm |
| Hold-up Volume | : | <20 µl |
| Sample Volume | : | <10 ml |
| Membrane Material | : | Nylon |
| Housing Material | : | Polypropylene |
| Inlet Connector | : | Female Luer Lock |
| Outlet Connector | : | Luer Slip Male |
| Filtration Area | : | 1.09 mm2 |
| Maximum Pressure | : | 87 psi |
| Sterility | : | Sterile |
| Pore Size | : | 0.45 µm |
| Disposable | : | Yes |
| Maximum Operating Temperature | : | 130°C |
| Filtration Media | : | Aqueous, Non-polar |
| Type | : | Hydrophilic |
- Luer-Lok™ and pressure fitting
- Ultrasonically bonded for reliability
- Filter media type clearly inscribed on barrel
- Excellent unit-to-unit and lot-to-lot reproducibility and consistency
- High purity virgin polypropylene housing, no dyes or pigments added
- Every unit type is available as an individually wrapped gamma sterilized pack
- Unique concentric funnel shaped barrel increases volume and decreases back pressure
- Determine chemical compatibility, volume and need for prefiltration
- Hydrophilic material; it is recommended for filtration of aqueous or organic/aqueous medium polar liquids
- Commonly used for general laboratory filtration and filtration of HPLC and GC samples prior to injection
- Filtration of aqueous and organic-aqueous polar medium liquids
- Dissolution sample analysis
- Suitable for use with high pH samples
- Since it binds proteins it is not suitable for protein recovery applications
- With microfiber prefilter higher absorption capacity for contamination
- Approved HPLC Certified